GDG20B型超级微纳米乳化机

设备介绍

该设备是由电机、底座、传动、密封、均质器、流量泵、压力保护装置、冷却、加热装置、控制单元等组成。物料从设备上口进入,经九级高速剪切,从下而上从上口排出。是GDG20A型的细分,定子和转子极小的配合间隙,在转子超速运行时产生粒子团微粒化,定子面静止,在强大的速差下,转子高速旋转,从而形成0.1-0.5um的薄膜,对粒径进行切割、剥离、分层,对物料进行乳化、分散、切割等作用。

1、具有对腔室内剪切的物料进行在线保温和加热功能,确保物料不会过热或过冷,满足各种工艺要求。

2、双端面机械密封自带水循环冷却和安全保护装置,具有压力示警保护功能,压力值低于安全压力时声光报警,高速旋转时密封更加可靠。3、采用五轴数控精密加工,保障了形位公差和尺寸公差的合格率,确保剪切定子、转子配合间隙仅为0.15mm高速下运行顺畅。高速运行的轴承温控装置，保证了8000r/min下长时间持续工作。

4、特殊材料保障主轴在高速运行时不会发生形变,线速度50m/s,跳动在0.05mm以内。

5、强大的剪切力、精密配合、稳定输出的组合下,物料粒径可达0.2-1um。

6、具有自循环清洗功能,满足GMP要求。

Equipment introduction

The equipment is composed of motor, base, drive, seal, homogenizer, flowpump, pressure protection device, cooling, heating device, control unit, etc.The material enters from the upper mouth of the equipment, goes throughnine high-speed shear, from the bottom up, and is discharged from theupper mouth. lt is the subdivision of GDG20A type, the stator and the rotorare very small with the gap, the particle agglomeration is granular when therotor is running at excessive speed, the stator surface is stationary, and therotor is rotating at high speed under the strong speed difference, thusforming a 0.1-0.5um film, cutting, stripping, delamination of the particle size,emulsifying, dispersing and cutting the material.

1,lt has the function of online insulation and heating for the materials cut inthe chamber to ensure that the materials will not be overheated orundercooled to meet various process requirements.

2,double-end mechanical seal with water circulation cooling and safetyprotection device, with pressure warning protection function, the pressurevalue is lower than the safety pressure sound and light alarm, high-speedrotation sealing is more reliable.

3, the use of five-axis CNC precision machining, to ensure the form andposition tolerance and dimensional tolerance of the pass rate, to ensure thatthe shear stator, rotor clearance is only 0.15mm high speed runningsmoothly. The high-speed bearing temperature control device ensures long.term continuous operation at 8000r/min.

4, the special material to ensure that the spindle at high speed operation willnot occur deformation, linear speed 50m/s, beating within 0.05mm.5. Under the combination of strong shear force, precise fit and stable output.the material particle size can reach 0.2-lum.6, with self-circulation cleaning function, to meet the GMP requirements.

GDG20B型超级微纳米乳化机