GDG20A型超级微纳米乳化机

设备介绍

该设备是由电机、底座、传动、密封、均质器、压力保护装置、冷却、加热装置、控制单元等组成。物料从设备上口进入,经九级高速剪切、分散,从上而下,从下口排出。

1、具有对腔室内剪切的物料进行在线保温和加热功能,确保物料不会过热或过冷,满足各种工艺要求。

2、双端面机械密封自带水循环冷却和安全保护装置,具有压力示警保护功能,压力值低于安全压力时声光报警,高速旋转时密封更加可靠。

3、采用五轴数控精密加工,保障了形位公差和尺寸公差的合格率,确保剪切定子、转子配合间隙仅为0.15mm高速下运行顺畅。高速运行的轴承温控装置,保证了8000r/min下长时间持续工作。

4、特殊材料保障在高速运行时不会发生形变,线速度50m/s,跳动在0.05mm以内。

5、强大的剪切力、精密配合、稳定输出的组合下,物料粒径可达0.5-1um.

6、具有自循环清洗功能,满足GMP要求。

GDG20A型超级微纳米乳化机

Equipment introduction

The equipment is composed of motor, base, transmission, sealing, homogenizer,pressure protection device, cooling, heating device, control unit, etc. Materialsenter from the upper mouth of the equipment, through nine high-speed shear,dispersion, from the top down, discharged from the lower mouth.

1，lt has the function of online insulation and heating for the materials cut in thechamber to ensure that the materials will not be overheated or undercooled tomeet various process requirements.

2, double-end mechanical seal with water circulation cooling and safety protectiondevice, with pressure warning protection function, the pressure value is lower thanthe safety pressure sound and light alarm, high-speed rotation sealing is morereliable.

3, the use of five-axis CNC precision machining, to ensure the form and positiontolerance and dimensional tolerance of the pass rate, to ensure that the shearstator, rotor clearance is only 0.15mm high speed running smoothly. The high-speed bearing temperature control device ensures long-term continuous operationat 8000r/min.

4, the special material guarantees that it will not be deformed during high-speedoperation, the linear speed is 50m/s, and the beating is within 0.05mm.5. Under the combination of strong shear force, precise fit and stable output, thematerial particle size can reach 0.5-lum.6, with self-circulation cleaning function, to meet the GMP requirements.