GHL高速湿法混合制粒机
GHL High Speed Mixing And Granulating Machine
特点：
★ 本机采用卧室圆筒（锥形）构造，结构合理。
★ 充气密封驱动轴，清洗时可切换成水。
★ 流态化造粒，成粒近似球形，流动性好。
★ 较传统工艺减少25%粘合剂，干燥时间缩短。
★ 每批次仅干混2分钟，造粒1-4分钟，工效比传统工艺提高4-5倍。
★ 在同一封闭容器内完成，干混一湿混一制粒，工艺缩减，符合GMP规范。
★ 整个操作具有严格的安全保护措施。
Features:
★ The machine adapts horizontal cylinder structure.Its sstructures is reasonable;
★ Use air filled seal shaft to drive.When washing,it can be changed to water;
★ Use fluidization to Granulate and the granule is near ball.Its flow is good;
★ Compared the traditional process,25%of adhesive can be reduced and the daying time can be shorted;
★ The time of mixing in dry is 2 minutes and the time of granulating is 1-4 minutes.Compared with the traditional process,4-5 times of efficiency is raised;
★ In the same sealed c ontainer,dry mixing,humidity mixing and granulating can be finished.It is in conformity with the reauirements of GMP;
★ The whole operation has strict safe and protective measures.
工作原理：
★ 物体物料与粘合剂在圆筒（锥形）形容器中由底部混合桨充分混合成湿润软材，然后由侧置的高速粉碎桨切割成均匀的湿颗粒。
Working Principle:
The powder raw material and adhesive in a cylinder are mixed fully at the bottom to become a humid soft material.
Then it is cut through hi8gh-speed crusher and become uniform granules.

GHL高速湿法混合制粒机
GHL High Speed Mixing And Granulating Machine
特点：
★ 本机采用卧室圆筒（锥形）构造，结构合理。
★ 充气密封驱动轴，清洗时可切换成水。
★ 流态化造粒，成粒近似球形，流动性好。
★ 较传统工艺减少25%粘合剂，干燥时间缩短。
★ 每批次仅干混2分钟，造粒1-4分钟，工效比传统工艺提高4-5倍。
★ 在同一封闭容器内完成，干混一湿混一制粒，工艺缩减，符合GMP规范。
★ 整个操作具有严格的安全保护措施。
Features:
★ The machine adapts horizontal cylinder structure.Its sstructures is reasonable;
★ Use air filled seal shaft to drive.When washing,it can be changed to water;
★ Use fluidization to Granulate and the granule is near ball.Its flow is good;
★ Compared the traditional process,25%of adhesive can be reduced and the daying time can be shorted;
★ The time of mixing in dry is 2 minutes and the time of granulating is 1-4 minutes.Compared with the traditional process,4-5 times of efficiency is raised;
★ In the same sealed c ontainer,dry mixing,humidity mixing and granulating can be finished.It is in conformity with the reauirements of GMP;
★ The whole operation has strict safe and protective measures.
工作原理：
★ 物体物料与粘合剂在圆筒（锥形）形容器中由底部混合桨充分混合成湿润软材，然后由侧置的高速粉碎桨切割成均匀的湿颗粒。
Working Principle:
The powder raw material and adhesive in a cylinder are mixed fully at the bottom to become a humid soft material.
Then it is cut through hi8gh-speed crusher and become uniform granules.

GHL
GHL High Speed Mixing And Granulating Machine
特点：
★ 本机采用卧室圆筒（锥形）构造，结构合理。
★ 充气密封驱动轴，清洗时可切换成水。
★ 流态化造粒，成粒近似球形，流动性好。
★ 较传统工艺减少25%粘合剂，干燥时间缩短。
★ 每批次仅干混2分钟，造粒1-4分钟，工效比传统工艺提高4-5倍。
★ 在同一封闭容器内完成，干混一湿混一制粒，工艺缩减，符合GMP规范。
★ 整个操作具有严格的安全保护措施。
Features:
★ The machine adapts horizontal cylinder structure.Its sstructures is reasonable;
★ Use air filled seal shaft to drive.When washing,it can be changed to water;
★ Use fluidization to Granulate and the granule is near ball.Its flow is good;
★ Compared the traditional process,25%of adhesive can be reduced and the daying time can be shorted;
★ The time of mixing in dry is 2 minutes and the time of granulating is 1-4 minutes.Compared with the traditional process,4-5 times of efficiency is raised;
★ In the same sealed c ontainer,dry mixing,humidity mixing and granulating can be finished.It is in conformity with the reauirements of GMP;
★ The whole operation has strict safe and protective measures.
工作原理：
★ 物体物料与粘合剂在圆筒（锥形）形容器中由底部混合桨充分混合成湿润软材，然后由侧置的高速粉碎桨切割成均匀的湿颗粒。
Working Principle:
The powder raw material and adhesive in a cylinder are mixed fully at the bottom to become a humid soft material.
Then it is cut through hi8gh-speed crusher and become uniform granules.