品牌
经销商厂商性质
北京市所在地
BOTTLE TOP SYSTEMS-READY-TO-USE VACUUM FILTRATION UNITS
瓶口真空过滤装置---REAGY-TO-USE
The graph shows the flow rate of the PES membrane with RPMI cell culture media with and without additional fetal calf serum(FCS) compared with PES-membranes of other manufacturers.
该图显示了Munkl 的PES膜相比其他厂商的PES的膜流速。用RPMI细胞培养基(RPMI-1640)和添加胎儿小牛血清(FCS)
The bottle top units are optimized for the application in cell culture. The built-in membrane made of polyethersulfone guarantees extremely high flow rates and low protein binding and is therefore ideal for the filtration of protein containing solutions.
The receiver flask is delivered with tube adapter and closure lid.
The bottle top units are sterile complete units with drainage vessel; the bottle top filtration units can be adapted on usual in trade, vacuum resistant bottles with a screw connector 45. Attention: only use bottles which are licensed for subpressure methods.
·Available in different sizes
·ready –to-use and easy to handle
·PES membranes combine high flow rates with low unspecific adsorption
在细胞培养中进行了优化应用的瓶顶单元,内置聚醚砜膜,保证了*的流速和低蛋白结合,因此适用于含蛋白质的过滤解决方案。
接收瓶交付带管适配器和封闭盖
瓶顶单元是无菌完整单元,带排放
瓶顶过滤装置,可适应常用市售45耐真空螺口瓶用。
注意:只能用被负压*的瓶子。
可供选择不同的尺寸
参数SPECIFICATION
孔径 Pore size 0.2um
属性 Finish 无菌sterile
体积 Volume 150ml,500ml,1000ml
膜Membrane polyethersulfone(PES) 50mm and 90mm diam
外壳Housing Polystyrene
连接Connectors plug- hose nipple插入式软管连接
细胞毒性Cytotoxity all materials correspond to USP class VI and cytotoxicity test ISO 10993
所有材质符合USP 要求(USP class VI) 和ISO10993细胞毒性测试
瓶颈尺寸Bottleneck size for
The Bottle Top Units 直径45 mm diam
灭菌Sterilization 伽马射线 Gamma Sterilization
瓶顶过滤单元—滤杯Bottle Top Unit
货号 | 品名 | 中文 | 尺寸 | 规格 | 单价 |
Art.No. | Grade/Code/Type | Size | Box | Price | |
Mu721 001w | Bottle Top Unit | 150ml滤杯,带接收瓶 | 0.2um | 12 |
|
Mu700 030w | Bottle Top Unit | 500ml滤杯,带接收瓶 | 0.2um | 12 |
|
Mu700 031w | Bottle Top Unit | 1000ml滤杯,带接收瓶 | 0.2um | 12 |
|
Mu721 004w | Bottle Top Unit | 150ml滤杯 | 0.2um | 12 |
|
Mu721 005w | Bottle Top Unit | 500ml滤杯 | 0.2um | 12 |
|
Mu721 006w | Bottle Top Unit | 1000ml滤杯 | 0.2um | 12 |
|
READY-TO-USE PRESSURE FILTRATIONUNITS
These pressure filtration units are designed for reliable sterile filtration of tissue culture solutions. They have a large filtration area and an automatic venting which allows high flow rates. Attached to a pump, these filters are suitable for the filtration of 100 ml up to 5 liters of media and aqueous solutions. They come in a polycarbonate housing and have a female luer lock or hose nipple connector. |
SPECIFICATION FOR SCAP
Adsorption | less than 10 μg per cm2 found in tests with g-Globulin |
Bubble Point | minimum value is 3.4 bar (340 kPa) |
Connectors | inlet female luer lock (6-12 mm) outlet stepped hose nipple (6-12 mm) |
Cytotoxicity | non-toxic as confirmed with MRC-5 embryonic lung cells and L-929 mouse fibroblast cells |
Extractables | pass the USP plastic test class VI |
Filling Volume | 6.0 ml |
Filtration Area | 20 cm2 |
Flow Rates | typical flow rate for water at 250 ml/min bei rp – 1 bar (100 kPa) |
Idle Volume | 0.3 ml after bubble point, 1.3 ml before bubble point |
Materials | cellulose acetate membrane filter (0.2 μm), PTFE vent. filter, polycarbonate housing |
Housing | Polycarbonate |
Max. Pressure | max. recommended initial pressure during filtration = bar (300 kPa) The housing withstands at least 5 bar (500 kPa) |