品牌
其他厂商性质
北京市所在地
IG-410日本堀场HORIBA光泽仪 硬度计
面议JF3000SJF3000S紫外荧光硫测定仪 定氮仪
面议MX-2000S紫外荧光硫含量分析仪测硫仪 定氮仪
面议GJ100-1E/GJ100-2密封式制样机GJ100-1A/2A/GJ200-1A
面议全自动量热仪立式煤炭化验设备石油颗粒砖厂
面议全自动量热仪煤炭热量化验仪油品燃油热值
面议高精度微机全自动量热仪检验检测煤炭化验
面议NX-A10/A20/B100光刻机NX-B200/1000/2000/2500/2600
面议POLOS200/300/450POLOS系列冲洗甩干机
面议EDC-650-23湿法刻蚀机EDC-650-8/EDC-650-15/EDC-650-X
面议150x125国仪树立普通鄂式破碎机
面议HB/EP100x60A HB/EP100x60E环保型颚式破碎机HB/EP100x100
面议RX-360SH自动荧光定硫仪
X-360SH 是按“能量色散X射线荧光光谱法(EDXRF) ”测定石油产品硫含量的仪器。可通用于车用汽油,柴油,原油,石脑油,渣油,润滑油基础油,液压油,喷气燃料和其他馏分油在内的碳氢化合物中的硫含量测定。适用于ISO 8754 ,ASTM D4294-03.,GB/T 17040的标准。测试过程简单高效,试验结果准确和重复性良好,是一种经济的无损测试.方法。
HIGH PRECISION: Digital pulse height analysis is automatically carried out at each measurement to adjust the system. This innovative system design has further improved the precision.
高精度:RX-350是一种可移动的高精度硫分析仪,体积小巧,便于搬运,原来必须在实验室是进行的硫分分析现在可通过直接在现场提取试样,立即得到高精度的分析结果。分析场所有了飞跃性的扩大。
WIDE RANGE OF SAMPLES: Patented “Diamond Parameter Method” accuray compensates for measurement error caused by different carbon/hydrogen(C/H) ratio of individual sample. This state-of-art technology enabled measurement of wide range of samples of different C/H ratios with uncompromising precision.
测试范围广:*的技术 “Diamond Parameter Method”,无论是轻油,原油,重油。从低浓度到高浓度,均能在短时间内通过简单的操作,高精度地测出硫分值。对于不同的碳氢化合物(C/H)也能自动补正
AMBIENT TEMPERATURE AND BAROMETRIC PRESSURE COMPENSATION: Compensation for ambient temperature and barometric pressure are made automatically to drastically minimize the drift. 对于环境的影响,可通过气压补正,温度补正进行自动调整。
RX-360SH自动荧光定硫仪
AUTOMATIC CALIBRATION: Set certified calibration standards and start automatic calibration program to carry out automatic calibration. Either multiple point calibration at up to 10 points or two points calibration starts.
用标准样品校正时,可自动进行多点(zui多到10点)的补正。
EASY OPERATION: Minimum numbers of membrane switches are located on the operation panel along with an LCD for easy dialogue type operation.
整个试验过程和采集的数据,可在LCD 上清晰显示。
COMPACT DESIGN/2-WAY POWER SOURCE: Compact design unit with carrying handle and 2-way power
RX-350是一种可移动型的高精度硫分析仪,体积小巧,便于搬运,可使用2种方式供电。可通过直接在现场提取试样,立即得到高精度的分析结果
source (100-240VAC*1 or 12VDC battery*2) allows such applications as spot-checking in the field.
*1: When used with the provided AC Adapter (100-240V AC 交流电源)
*2: When used with optional 12VDC cord with lighter plug (车载12 V 蓄电池直流电)
LOWER RUNNING COST: The Teflon sample cell is permanent and used with a small piece of disposable Mylar film. The only other consumable is the printing paper, making the running cost at minimal.
运行维护成本低:试验仪器所有的配件中只有“测试膜”和“打印纸”是易耗品,日常使用和运行维护成本很低。
TYPE:
Total sulfur analyzer for petroleum products by energy-dispersive X-ray fluorescence method
用非色散X射线荧光光谱分析法测定石油产品中硫含量
CONFORMING STANDARDS: (适用标准)
ISO 8754, ASTM D4294-03, GB/T 17040 etc.
NUMBER OF TEST:
One(1) (单样品测试)
SAMPLE VOLUME: (样品需求)
3-5ml (每次测试只需要3-5ml)
MEASURING RANGE: (硫含量测试范围)
0-6.00wt%
REPEATABILITY: (Typical) 结果重复性
Range(范围) | Std Deviation(标准误差) | Measuring Time(测试计数) |
0.008wt%max | 5ppm | 300sec x 3times(300秒测试3次) |
0.05wt%max | 10ppm | 100sec x 3times |
0.05-0.50wt% | 20ppm | 100sec x 3times |
0.51-1.50wt% | 30ppm | 100sec x 3times |
1.51-2.00wt% | 50ppm | 100sec x 3times |
2.01-4.00wt% | 100ppm | 100sec x 3times |
4.01-6.00wt% | 200ppm | 100sec x 3times |
C/H RATIO COMPENSATION: (C/H补正误差)
Automatic with 0.003wt% max of compensation error when a 1wt% sample is tested.
MEASURING TIME: (测试方式)
10-300sec with a 10sec increment. 1-99 times. (测试时间10-300秒,每10秒为一单位设定,可设定重复测试 1-99 次)
CALIBRATION: (仪器标定方式)
*Automatic two point calibration 自动2点标定
*Manual two point calibration 手工2点标定
*Automatic multiple-point calibration(up to 10 points) 自动多点标定(zui多10点)
*Manual multiple-point calibration(up to 10 points) 手工多点标定(zui多10点)
X-RAY SOURCE: (x射线源功率)
X-ray tube operated at 7kV-0.15mA
SAMPLE CUP: 样品杯
2-piece Teflon cup with disposable Mylar film(2个聚四氟乙烯样品底座+一次性(Mylar)分子薄膜)
PRINTER: (打印)
Built-in impact dot matrix printer (W57mm) (内置点式打印机,纸宽57mm)
DISPLAY: (显示屏)
LCD (20 characters x 4 lines) LCD可显示20字符,4行
X-RAY LEAKAGE: (x射线源外散)
0.6 micro Sv/Hr or less on instrument surface (经测试,仪器表面小于0.6 micro Sv/Hr)
DATA OUTPUT: (数据输出)
RS-232C 1 channel (标准RS-232C接口,1)
OPARATING TEMPERATURE/HUMIDITY: (环境要求)
10-30℃ with a temperature drift within 10oC in a day. RH to be within 80%.
室温10~30℃(一天内的温差变化在10℃以下) / 湿度80‰ RH以下
POWER SUPPLY: (电源需求)
DC12V (with the provided AC Adapter or optional 12VDC cord with lighter plug)
外置DC 12V(直流)电源(带交流电源适配器或车载电源适配器)
SAFETY: (安全防护)
Interlock mechanism against accidental X-ray leakage (双重保险设计,有效避免 x射线泄露)
DIMENSIONS/WEIGHT: 尺寸/重量
(测试部)Test head: 420mmW x 350mmD x140mmH/11kg
(电源部)AC Adapter: 50mmW x 115mmD x 25mmH/0.25kg
STANDARD ACCESSORIES: (标准附件)
1.AC Adapter 交流电源适配器 | 1 |
2.Teflon sample cells (5pcs/box) 样品杯组(5个/组) | 1组 |
3.Sample cell assembling jig 样品杯组装工具 | 1 |
4.Sample cell disassembling jig 样品杯分解工具 | 1 |
5.Sample cell stand 样品杯底座 | 1 |
6.Mylar film (200mm x 1,000m) 样品膜(200mmX1,000米) | 1 |
7.Printer roll paper 打印纸 | 3 |
8.Spare Printer ink ribbon 备用打印机色带 | 1 |