体积小、结构紧凑而灵活的泡罩包装机，具有较高的生产效率。

　　整体设计、加工制造符合GMP要求：

　　占地2平方米，每分钟可生产240个板块，新型的结构，限度满足用户要求。整机采用框架式全封闭结构，与药品接触材料选用优质不锈钢，上料机构中的料盘、滚刷易于拆装清洗、方便、快捷。

　　更换模具简便快捷：

　　改变板块尺寸，更换模具对机器进行调整时，不需要高级技工和特殊工具即可在短时间内快速实现。

　　主要器件和关键件采用国外品牌配套，保证工作平稳可靠。

　　PVC加热器和热压辊加热器的温度控制准确，安全可靠，不会对包装材料和药品造成损伤。

　　整机电脑自动控制，运行速度无级调节。

　　无废料横边冲裁节省包装材料，冲裁前步进采用推板式步进，使得板块平整，方便调整可靠。

　　DPH130泡罩包装机具有非同寻常的特点：

　　本机预热台加热板温度场均匀，控制可靠。设定温度与实际温度误差±2度，能适应于较为广泛的热塑成型材料：

　　PVC、PP、PVC-PVDC、PVDC-PE-PVDC等

　　特别是热塑温度范围较窄的包装材料，更能够显示出独到之处。

　　PVC步进方式，在PVC加热板之前和成型台之后两处气动夹特点，由于采用双夹持步进，可防止加热区内已经被加热软件的PVC片由于受快速牵拉移动而造成拉伸变形，影响泡罩质量。本机可以实现高速成型，又能保证良好的泡罩质量。

　　PVC下加热板随着形成台模具的上下运动作相应的间歇运动，当PVC夹持移动时下加热板处于下止点(上下加热板有间隙)，减少PVC与加热板接触，PVC不粘片。

　　如果泡罩形状复杂、成型深度较大，超过正压吹气成型的变形范围，可以在成型台增设成型辅助冲头，变成机械＋气动双作用成型，确保泡罩壁厚均匀挺括。

　　可以随意调整的弃填平台，当更换板尺寸或改变包装品种时，不需更换平台，只作简单调整，2分钟即可完成。

　　随时可以开机与停机，PVC板块无停机痕迹。

　　外部各工作部件，凡是属于运动件、加热件均有防护罩保护，确保工作安全。

　　带有板块平整机构，使得板块平整美观，便于后续整理装盒。

　　操作简便易行，大部分调整件和模具更换不需要特殊工具即可短时间内完成。

　　传动件及各个部件手工操作容易，极其方便地进行日常维修保养。

　　用户订货时可以根据需要提出特殊配置

　　充填上料机：能用滚刷上料机、通用滚刷加长上料机、胶囊调头上料机、高速专用(平片、胶囊)上料机。

　　控制部分：普通控制、人机界面控制。

　　自动检测：光电自动检测、摄像自动检测。

　　平　　台：普通型、加长型。

　　输送机：1.5米输送机。

　　板块排列，生产效率参考表

　　样本中的照片及插图仅表示DPH130普通型配罩，如果有特殊需要或不清楚之处请与公司技术部联络

技术规格如有变动，恕不另行通知。

DPH130B Aluminum-plastic Blister Packing Machine

　　With small size and compact configuration，the blister packing machine is flexible with higher production efficiency。

　　Designed and manufactured as the requirements of GMP:

　　Covered 2 square meters, the machine can product 240 pieces plates per minute with its new-type structure to meet the demａnd of customers at large. Adopted totally-enclosed frame structure, the machine selects the high quality stainless steel to contact with the drugs, and it dismantles and cleans the charging tray and roll brush of the feeding mechanism conveniently and quickly。

　　Replace the mould easily and quickly：

　　Adjust the machine without senior technicians and special tools after changing the size of plates and replacing the mould. The adjustment can be fulfilled in a short time.。

　　Select the parts of foreign famous brands as the chief parts and fittings to ensure the work stable and reliable.。

　　The temperature control to PVC heat exchanger and the hot-pressing roller heat exchanger is exact and reliable without any harm to the packing material and the medicine。

　　The whole machine is controlled by the computer, and its speed is regulated sleeplessly

　　Horizontal sides cutting without scrap can save packing material. Adopting push-type stepping as the front stepping of blanking makes the plate flat and easy to adjust as well as reliable.

　　DPH130 Froth-Cover Packaging Machine has excellent features：

　　The heating plate on the preheating table of this machine is characterized by even temperature field and reliable control, the error being ±2 degrees between set temperature and actual temperature. It is applicable to extensive hot forming materials;

PVC、PP、PVC-PVDC、PVDC-PE-PVDC

　　especially packaging materials of a narrow range of hot forming temperature to show its uniqueness. 。

　　PVC stepping mode: it features an air-powered clamping device on both before PVC heating plate and behind forming table. The adoption of double clamping stepping prevents PVC chip in the heating area from tension and deformation as a result of rapid stretching and moving, which would affect the quality of froth-cover. This machine can achieve high-efficient forming with a guaranteed quality of forth cover.

　　The lower heating plate makes intermittent motion along with the forming table moves upward and downward. When PVC clamping device moves, the lower heating plate is at bottom dead center (there is a gap between the upper and lower heating plates), minimizing PVC’s direct contact with the heating plate, thus PVC is not sticky.

　　If the froth-cover is complicated in shape and forming depth, beyond the distortion range of blow forming with positive pressure, then a forming auxiliary punch can add to forming table, turning into mechanical and pneumatic forming to ensure the thickness of froth-cover is stiff and smooth.

　　Infilling platform can be easily adjusted. There is no need to change the platform when the size or packaging type is to be replaced. The adjustment can be easily done in two minutes.

　　The machine can be turned on and off at any required time without the trace of shutdown at PVC plate.

　　Those exterior moving and heating parts are all protected by protective hoods to ensure their safety.

　　With a plate smoothing function, make the plate smooth and beautiful and also convenient to further tidy and pack.

　　Easy operation, most adjusting parts and moulds can be replaced in a short time without the use of special tools.

　　Transmission parts and all other parts are easy to operated manually and convenient to keep maintenance on a daily basis.

　　Consumers may require special configuration based on their own needs when making an order.

　　Filling feeder: variety includes roller brush feeder, common roller brush extended feeder, capsule adjusting feeder and high speed (slice, capsule) feeder.

Control part: general control, man-machine interface control

　　Automatic detection: photoelectric automatic detection, photographic automatic detection.

　　Table: common type and extended type

　　Conveyor: a conveyor of 1.5 meters.

　　Reference Table of Plate Arrangement and Productive Efficiency

　　Photos and illustrations of the sample only show DPH130 common type mask matching. Please contact the technology department of the company for special requirements or problems.

　　Technological specifications are subject to change without prior notice.