塑胶干燥机系列 Plastic Direct-drive Dryer Series

真空干燥机

东莞市金炜机械有限公司是香港JINWELL集团旗下的大陆子公司，：/。

1. 真空干燥机采用均匀分散热风之高性能热风扩散装置，保持塑料干燥温度均匀，增加干燥效率。
2. *热风弯管型设计，可避免粉屑堆积于电热管底部，引起燃烧。
3. 料桶内及内部零部件一律采用不锈钢制。料桶内与底部分离，清料方便，换料迅速。
4. 采用比例式偏差指示温控器，可精确控制温度。
5. 双重过热保护装置，可减少人为或机械故障所产生的意外。
6. 微电脑控制，全位数式PD，控制LED状态显示。
7. 24小时定时自动开机。
8. 斜式易拆磁铁底座。

Hopper Dryer

1. High performance hot air diffusion device using uniformly distributed hot air, keep the plastic dry and uniform temperature, increase drying efficiency.
2. Design of special hot air bent pipe, to avoid accumulation of power particles in the bottom of the electric heating pipe to cause combustion.
3. The barrel and the inner parts are all made of stainless steel. Separation between the barrel and the bottom, material cleaning convenience, refueling quickly.
4. Proportional deviation indicating controller, can precise temperature control.
5. Double overheating protection device, can reduction of accidents caused by human or mechanical failure.
6. Microcomputer control, full figure PD, control LED status display.
7. 24 hour timer automatically boot.
8. Inclined easy detachable magnet base.