L.ADU PNEUMATIC
L.ADU PNEUMATIC
L.ADU基础
LADU气动直角
LADU Pneumaticinline
LADU Pneumaticgrip
LADU气动
L.ADU BASIS RIGHT-ANGLED
有3种不同的电机版本可供选择：55,56和57型
电机版本类型取决于所需的孔尺寸和材料堆叠
为了获得更多的功率，还可以安装涡轮电机
选择合适的锁定系统后，机器即可使用
LADU气动
L.ADU BASIS INLINE
有3种不同的电机版本可供选择：55,56和57型
电机版本类型取决于所需的孔尺寸和材料堆叠
为了获得更多的功率，还可以安装涡轮电机
选择合适的锁定系统后，机器即可使用
LADU气动
L.ADU BASIS GRIP
有两种不同的电机版本：55型和56型
电机版本类型取决于所需的孔尺寸和材料堆叠
为了获得更多的功率，还可以安装涡轮电机
选择合适的锁定系统后，机器即可使用
L.ADU锁定系统
LADU气动同心夹头
LADU PneumaticTwistLock
LADU PneumaticC-Frame
LADU PneumaticTaperlock
LADU PneumaticTraverse
LADU PneumaticGeared Offset
LADU气动
同心套（CC）
材料堆叠：CFRP |钛|铝
一次性钻孔和反补丁
几乎100％的芯片和粉尘排放
高达700 N的锁模力
LADU气动
扭锁
材料堆叠：CFRP |钛|铝
一次性钻孔和反补丁
可选芯片和灰尘排气
没有夹紧力
Kann hoheVorschubkräfteaufnehmen
带有集成的快速更改索引
LADU气动
C-FRAME
材料堆叠：CFRP |钛|铝
一次性钻孔和counters孔
几乎100％的芯片和粉尘排放
高达1.200 N的锁模力
定位überPilotspitze im Gegenhalter
Bohrwerkzeug mit Pilotspitze或Bohrschablone
P型：Aufklappbarer Gegenhalterfüreinfache Positionierung | Materialschichtstärke：0-100毫米
J型：Kein aufklappbarer Gegenhalter，Bauteilklemmung durch Parallelhub | Materialschichtstärke：5-40毫米
LADU气动
TAPERLOCK（TPL）
材料堆叠：CFRP |钛|铝
一次性钻孔和反补丁
几乎100％的芯片和粉尘排放
没有夹紧力
LADU气动
真空导线（VT）
材料堆叠：CFRP |铝
一次性钻孔和counters孔
几乎100％的芯片和粉尘排放
高达1.000 N的夹紧力
LADU气动
GEARED OFFSET（GO）
材料堆叠：CFRP |钛|铝
一次性钻孔和counters孔
可选芯片和灰尘排气
没有夹紧力
L.ADU选项
LADU气动圆形计数器
LADU PneumaticMQL-系统
LADU PneumaticSine-Feed
LADU Pneumatic快速更换系统
LADU Pneumatic快速更换索引
LADU气动双手握
LADU气动
周期计数器
计算钻井周期
数字LED显示
钻井周期信息导致的预防性维护
用磁针重置计数器
更多关于L.ADU选项
LADU气动
MQL系统
为了*的钻孔和表面质量
质量的冷却液
恒定的微滴进料
冷却液量可以单独调整
易于补充
更多关于L.ADU选项
LADU气动
SINE-FEED
LübberingsMirco-Peck解决方案正弦馈送将长芯片分解成微芯片
微芯片提供 的钻孔质量
LübberingsSine-Feed甚至可以使用一次性钻孔和counters孔
名称“正弦进给”代表正弦波如主轴振动
将组装到基础机器中
也可以使用MQL系统（干式切割）
更多关于L.ADU选项
LADU气动
快速更换系统
由于统一的界面，锁定系统快速切换
良好的切割工具（如清洁）
低损伤 风险
更多关于L.ADU选项
LADU气动
快速更改索引
与集成的快速更换系统快速更换锁定系统
附加值：机器360°旋转
只需拉动，转动并释放 - 机器就锁定在所需的位置
轻松和舒适的处理
更多关于L.ADU选项
LADU气动
双手抓
双手gip - 理想的高空作业
可用于基础机器的内联版本
更多关于L.ADU选项
L.ADU气动 - 模块标准程序
由于采用模块化结构，可以单独配置
3个基准机器，6个锁定系统和6个附加选项的结果是超过100种不同的可能组合
根据钻孔尺寸和工艺的不同，有不同的型号（直角，直列，夹紧）和电机类型（55,56,57型）
基础机器（L.ADU基础）与锁定系统（L.ADU锁定系统）一起准备使用
模块化概念提供舒适的附加选项（L.ADU选项）
由于统一的接口（L.ADU快速更换系统），锁定系统可以快速轻松地进行更改。
低维护：磨损和备件的 要求（<10％）
优化钻孔质量：CFRP中不会出现分层 - 无钻孔钻孔
right-angled
inline
grip
L.ADU BASIS RIGHT-ANGLED
- available in 3 different motor versions: type 55, 56 and 57
- motor version type depends on required hole size and material stack
- for more power a turbine motor can also be fitted
- after selecting a suitable locking system, the machine is ready to use
L.ADU BASIS INLINE
- available in 3 different motor versions: type 55, 56 and 57
- motor version type depends on required hole size and material stack
- for more power a turbine motor can also be fitted
- after selecting a suitable locking system, the machine is ready to use
L.ADU BASIS GRIP
- available in 2 different motor versions: type 55 and 56
- motor version type depends on required hole size and material stack
- for more power a turbine motor can also be fitted
- after selecting a suitable locking system, the machine is ready to use
L.ADU locking systems
Concentric-Collet
TwistLock
C-Frame
Taperlock
Traverse
Geared Offset
CONCENTRIC COLLET (CC)
- material stacks: CFRP | titanium | aluminium
- one-shot drilling and countersinkung
- nearly 100 % chip and dust exhaust
- up to 700 N clamping force
TWIST LOCK
- material stacks: CFRP | titanium | aluminium
- one-shot drilling and countersinkung
- optional with chip and dust exhaust
- no clamping force
- Kann hohe Vorschubkräfte aufnehmen
- comes with an integrated Quick Change Indexing
C-FRAME
- material stacks: CFRP | titanium | aluminium
- one-shot drilling and countersinking
- nearly 100 % chip and dust exhaust
- up to 1.200 N clamping force
- Positioning über Pilotspitze im Gegenhalter
- Bohrwerkzeug mit Pilotspitze oder Bohrschablone
- Type P: Aufklappbarer Gegenhalter für einfache Positionierung | Materialschichtstärke: 0-100 mm
- Type J: Kein aufklappbarer Gegenhalter, Bauteilklemmung durch Parallelhub | Materialschichtstärke: 5-40 mm
TAPERLOCK (TPL)
- material stacks: CFRP | titanium | aluminium
- one-shot drilling and countersinkung
- nearly 100 % chip and dust exhaust
- no clamping force
VACUUM TRAVERSE (VT)
- material stacks: CFRP | aluminium
- one-shot drilling and countersinking
- nearly 100 % chip and dust exhaust
- up to 1.000 N clamping force
GEARED OFFSET (GO)
- material stacks: CFRP | titanium | aluminium
- one-shot drilling and countersinking
- optional with chip and dust exhaust
- no clamping force
L.ADU options
Circle-Counter
MQL-System
Sine-Feed
Quick Change System
Quick Change Indexing
Two-Hand-Grip
CYCLE COUNTER
- Counts the drilling cycles
- Digital LED display
- Preventive maintenance due to drill cycle information
- Reset the counter with the magnetic pin
More about L.ADU options
MQL SYSTEM
- For perfect drilling and surface quality
- Highest quality of coolant
- Constant feed of micro drops
- Quantity of coolant can be individually adjusted
- Easy to refill
More about L.ADU options
SINE-FEED
- Lübberings Mirco-Peck solution Sine-Feed breaks the long chips into micro chips
- Micro chips for perfect drilling quality
- Lübberings Sine-Feed is even possible with one-shot drilling and countersinking
- The name "Sine-Feed" stands for sine like spindle vibrations
- Will be assembled into the basis machine
- Also with MQL System possible (dry cutting)
More about L.ADU options
QUICK CHANGE SYSTEM
- Quick changeover of locking systems due to uniform interface
- Good access to the cutting tool (e.g. for cleaning)
- Low risk of damaging the cutting tool
More about L.ADU options
QUICK CHANGE INDEXING
- Quick exchange of locking systems with the integrated Quick Change System
- Additional value: 360° rotation of the machine
- Just pull, turn and release - and the machine is locked in the desired position
- Easy and comfortable handling
More about L.ADU options
TWO-HAND GRIP
- Two-hand gip - ideal for overhead work
- Available for inline version of the basis machine
More about L.ADU options
L.ADU PNEUMATIC – MODULAR STANDARD PROGRAM
- Can be individually configurated thanks to the modular structure
- The outcome of 3 basis machines, 6 locking systems und 6 additional options is over 100 different possible combinations
- Depending on the drilling size and process there are different models (right-angled, inline, grip) and motor types (type 55, 56, 57) available
- The basis machine (L.ADU basis) is together with the locking system (L.ADU locking system) ready to use
- The modular concept offers comfortable additional options (L.ADU options)
- The locking systems can be changed quickly and easily due to a uniform interface (L.ADU Quick Change System)
- Low maintenance: Minimum requirement of wear and spare parts (< 10%)
- Optimised Drilling Quality: no delamination in CFRP - burrless drilling
- Enormous time saving thanks to one-shot drilling and countersinking
- 品牌 型号
COREMO C_A074_KC52_3125403-M6017_DLZ001_EN_S1_R00_AP_A2 TYPE:D-3N A2606 LEFT HAND
COREMO C_A074_KC52_31421016-M1026_DLZ001_EN_S1_R00_AP_A2 reference:D2N-30/4-RH
Parker DXD06032
JOSEF EMMERICH 510SPPH 32521-aag-ck-032274
MSC Tuttlingen GmbH type: CC12-V ID:6335274
Haegglunds FG3777721
lubbering 80241504
lubbering 80280101
lubbering 80341103
lubbering 70280501
lubbering 70280502
优势供应德国LUBBERING，LUBBERING装备工具，手持枪输出头、LUBBERING拧紧装配偏置工具、LUBBERING特殊头,LUBBERING开口头、LUBBERING闭口头、LUBBERING拧紧枪头
LUBBERING拧紧装配偏置工具 LUBBERING拧紧装配偏置工具 LUBBERING拧紧装配偏置工具
SPECIAL OPEN HEAD|89131405
>luebbering SICOPOINT9090
>luebbering 89541202
>LUDWIG LEUCHTEN KG | moisture-proof light|BJ18 /TYPE 135NS GP; 1XT58 W >LEUCHTS;komp WG Does L58/84;230V/50Hz
>LUDECKE ESD9TLAB
>LUDECKE ESD14NA
>LUBE Card sets _207254, ??8
>lubbering 13MM sleeve gear 70914320
>lubbering 80280101
>lubbering 70280501
>lubbering 80241504
>LUBBERING SPECIAL OPEN HEAD|89131405
>LUBBERING sicopoint 9000
>LUBBERING 85134365
>LUBBERING 80929264
>lubbering 80341103
>lubbering 80341103
>lubbering 80280101
>lubbering 80241504
>lubbering 70280502
>lubbering 70280502
>lubbering 70280501
