进口耐腐蚀离心泵

进口耐腐蚀离心泵

参考价: 面议

具体成交价以合同协议为准
2024-09-06 07:33:54
288
产品属性
关闭
深圳市凯士比阀门有限公司

深圳市凯士比阀门有限公司

免费会员
收藏

组合推荐相似产品

产品简介

进口耐腐蚀离心泵是按国际标准并结合非金属泵的工艺设计制造

详细介绍

进口耐腐蚀离心泵是按国际标准并结合非金属泵的工艺设计制造。泵体采用金属外壳内衬聚全氟乙丙烯(F46),泵盖、叶轮和轴套均用金属嵌件外包氟塑料整体烧结压制而成,轴封采用外装式的波纹管机械密封,静环选用99.9%氧化铝陶瓷(或氮化硅),动环采用四氟填充材料,其耐腐耐磨密封性。泵的进出口均采用铸钢体加固,以增强了泵的耐压性。实际使用显示,德国汉克(HANK)离心泵具有耐腐、耐磨、耐高温、不老化、机械强度高、运转平稳、结构合理、密封性能严格可靠、拆卸检修方便、使用寿命长等优点。
产品用途
1、汽车制造中的酸洗、喷漆工艺;
2、有色金属冶炼中的电解液输送;
3、离子膜烧碱项目中的氯水、废水处理和加酸等工艺流程。
适用温度
耐腐蚀离心泵适用于-20℃~100℃的工况条件,当使用温度超过120℃时,泵叶轮需采用耐高温材料,适宜连续输送任意浓度的强酸、强碱、有机溶剂、强氧化剂等高危液态化学介质。当输送固体颗粒含量5%左右的液态腐蚀性介质时,需配套耐腐耐磨机械密封。
设计特点
1、按国际标准设计,泵体采用金属外壳内衬氟塑料,叶轮及泵盖均采用金属嵌件外包氟塑料合金压制成型,轴封采用的外装式波纹管机械密封,静环选用99.9%氧化铝陶瓷,动环采用四氟填充材料(或根据特殊工况专配其他材质),其特点是耐腐耐磨密封性好。
2、所有过流部件均采用氟塑料或氟塑料合金制造,耐腐蚀范围广。基体采用金属制造,承压能力强,轴封采用的外装式波纹管机械密封,密封性能可靠。采用短支架直连结构,叶轮轴与电机轴采用可靠的莫氏锥度传递扭矩,泵机占地面积小。
Corrosion-resistant centrifugal pumps are designed and manufactured according to international standards and combined with non-metallic pumps. (F46), the pump cover, the impeller and the sleeve are all made of metal insert with fluorine plastic as a whole sintered and pressed, the shaft seal adopts the exterior advanced bellows mechanical seal, static Ring selection of 99.9% alumina ceramic (or silicon nitride), dynamic ring using PTFE filled material, its anti-corrosion wear resistance excellent. Pumps are imported and exported are cast steel body reinforcement, to enhance the pump pressure. The actual use shows that the German Hank (HANK) centrifugal pump with corrosion-resistant, wear-resistant, high temperature, non-aging, high mechanical strength, smooth operation, advanced structure and reasonable, tight sealing performance, easy disassembly and maintenance, long life The
Product Usage
1, the automobile manufacturing in the pickling, painting process;
2, non-ferrous metal smelting in the electrolyte delivery;
3, ion-exchange membrane caustic soda project in the chlorine water, wastewater treatment and acid and other processes.
Proper temperature
Corrosion-resistant centrifugal pump for -20 ℃ ~ 100 ℃ working conditions, when the use of temperature exceeds 120 ℃, the pump impeller need to use high temperature materials, suitable for continuous delivery of any concentration of strong acid, alkali, organic solvents, strong oxidants High - risk liquid chemical medium. When the transport of solid particles about 5% of the liquid corrosive medium, the need to supporting corrosion-resistant mechanical seal.
Design Features
1, according to international standards, the pump body with metal shell lined with fluorine plastic, impeller and pump cover are used metal insert fluorine plastic alloy extrusion molding, shaft seal using advanced exterior bellows mechanical seal, static ring selection 99.9% Alumina ceramic, dynamic ring using PTFE filler material (or according to special conditions with other materials), which is characterized by good corrosion resistance and wear resistance.

2, all over-flow components are made of fluorine plastic or fluorine plastic alloy, corrosion-resistant range. The base is made of metal, and the pressure is strong. The shaft seal adopts the advanced exterior bellows mechanical seal, and the sealing performance is reliable. Using short support direct structure, impeller shaft and motor shaft with a reliable Mohs taper transmission torque, pump area is small.

德国汉克(HANK)成立于1852年创建于门兴格拉德巴赫(Monchengladbach)是位于德国北莱茵-威斯特州杜塞尔多夫市以西的一座城市。于19世纪50年代初德国经济快速发展,由于德国能源短缺,政府在节能方面加大力度,因此HANK(Trouble Less pump的水泵)公司成立。汉克水泵是以生产高品质、的水泵、测量及控制系统而的跨国性生产企业,在几十个国家拥有子公司及分支机构,公司产品涉及用途:石油、化工、电力、冶金、制药、食品、水处理、市政给排水、天然气、造纸、电子工业、楼宇、机械设备配套等领域。

GERMANY HANK PUMP LIMITED is founded on 1852 in Monchengladbach,which is located at one city in North Rhine in Germany, which is the west of Nordrhein-Westfalen. At the beginning of 1850s, as the rapid development of economic and the shortages of energy in Germany , the government had been in saving energy aspect. On this occasion, HANK Pump (Trouble Less Pump) was established.Hank pump is the world-famous transnational production enterprise,which produces high quality and advanced pump, measurement and control system, and which has its divisions and branches in dozens of countries in the global. The company products user involves the petroleum, the chemical industry, the electric power, the metallurgy, the drugs manufacture, food, the water treatment, the municipal administration to give draining water, the natural gas, the papermaking, the electronics industry, the building, the mechanical device necessary ect..

德国汉克(HANK)水泵的价值理念概括为:责任-远见-创新。我们因自身的责任感、远见及专注于创造的解决方案和理念,而成为的水泵制造商。
The conclusion of the pump concept in German Hank pump is resposibility,foresight,innovation. For ourselves resposibility, foresight and focusing on creating unprecendented solution and concept,our company has become the lead of pump manufacturer in the global.

    
上一篇:爱泽工业部分到货产品专题及库存—BUHLER篇 下一篇:自吸式离心油泵机械密封安装
热线电话 在线询价
提示

请选择您要拨打的电话: