进口卧式离心泵

进口卧式离心泵

参考价: 面议

具体成交价以合同协议为准
2024-09-06 07:28:24
149
产品属性
关闭
深圳市凯士比阀门有限公司

深圳市凯士比阀门有限公司

免费会员
收藏

组合推荐相似产品

产品简介

进口卧式离心泵根据德国汉克(HANK)离心泵与立式泵的结构组合设计,并严格按照国际标准ISO2858进行设计制造的高效节能产品

详细介绍

进口卧式离心泵根据德国汉克(HANK)离心泵与立式泵的结构组合设计,并严格按照国际标准ISO2858进行设计制造的高效节能产品。该泵采用水力模型优化设计而成。同时根据使用温度、介质等不同在原有基础上派生出热水泵、高温泵、化工泵、油泵等,是目前国际标准定型推广产品。
产品特点
1、运行平稳:泵轴的同心度叶轮优异的动静平衡,保证平稳运行,振动。
2、滴水不漏:不同材质的硬质合金密封,保证了不同介质输送均无泄漏。
3、噪音低:两个低噪音轴承下的水泵,运转平稳,除电机微弱声响,基本无噪声。
4、故障率低:结构简单合理,关键部分采用配套,整机工作时间大大提高。
5、维修方便:更换密封、轴承、简易方便。
6、占地更省:出口可向左、向右、向上三个方向,便于管道布置安装,节省空间。
主要用途
1、 供输送清水及物理化学性质类似于清水的其他液体之用,适用于工业和城市给排水,高层建筑增压送水,园林灌溉,消防增压及设备配套,使用温度T:≤80℃。
2、 适用于能源、冶金、化工、纺织、造纸、以及宾馆饭店等锅炉高温热水增压循环输送及城市采暖系统循环用泵,使用温度T:≤120℃。
3、 供输送不含固体颗粒,具有腐蚀性,粘度类似于水的液体,适用于石油、化工、冶金、电力、造纸、食品、制药和合成纤维等部门,使用温度T:-20℃-120℃。
4、供输送汽油、柴油、煤油等石油产品,使用温度T:-20℃-120℃。
使用条件
1、 吸入压力≤1.0Mpa,或泵系统工作压力≤1.6Mpa,即泵吸入口压力+泵扬程≤ 1.6Mpa、泵静压试验压力为2.5Mpa。泵系统工作压力大于 1.6Mpa时应在订货时另行提出。以便德国汉克(HANK)工厂制造时泵的过流部件和联接部分采用铸钢材料。
2、 环境温度<40℃,相对湿度<95%。
3、 所输送介质中固体颗粒体积含量不超过单位体积的0.1%,粒度<0.2mm.
注:如使用介质为带有细小颗粒,请在订货时说明,以便采用耐磨式机械密封。
Horizontal centrifugal pump According to the German Hank (HANK) centrifugal pump and vertical pump unique combination of design, and in strict accordance with the international standard ISO2858 design and manufacture of energy efficient products. The pump is designed using the international advanced hydraulic model. At the same time according to the use of temperature, medium and other different on the basis of the original derived from the hot water pump, high temperature pumps, chemical pumps, pumps, etc., is the current international standard stereotypes to promote products.
Features
1, smooth operation: the axis of the absolute concentric impeller excellent static and dynamic balance, to ensure smooth operation, no vibration.
2, water leakage: different materials, carbide seal, to ensure that no leakage of different media delivery.
3, low noise: two low-noise bearings under the pump, smooth operation, in addition to the motor faint sound, the basic no noise.
4, the failure rate is low: the structure is simple and reasonable, the key part of the use of world-class quality support, machine trouble-free working hours greatly improved.
5, easy maintenance: replacement seals, bearings, simple and convenient.
6, covers a more provincial: exports can be left, right, up three directions, easy to install the pipeline installation, save space.
The main purpose
1, for the delivery of water and physical and chemical properties similar to other liquids used in water, for industrial and urban water supply and drainage, high-rise building pressurized water, garden irrigation, fire pressurization and equipment support, the use of temperature T: ≤ 80 ℃.
2, for energy, metallurgy, chemicals, textiles, paper, and hotels and other high-temperature hot water boiler cycle and the city heating system circulation pump, the use of temperature T: ≤ 120 ℃.
3, for the transport of non-solid particles, corrosive, viscosity similar to the liquid water, for petroleum, chemical, metallurgical, power, paper, food, pharmaceutical and synthetic fiber and other departments, the use of temperature T: -20 ℃ -120 ℃.
4, for the delivery of gasoline, diesel, kerosene and other petroleum products, the use of temperature T: -20 ℃ -120 ℃.
Conditions of Use
1, suction pressure ≤ 1.0Mpa, or pump system maximum working pressure ≤ 1.6Mpa, that is, pump inlet pressure + pump head ≤ 1.6Mpa, pump static pressure test pressure of 2.5Mpa. Pump system working pressure greater than 1.6Mpa should be made when ordering. So that when the Hank (HANK) factory in Germany, the pump flow components and connecting parts are made of cast steel.
2, ambient temperature <40 ℃, relative humidity <95%.
3, the volume of solid particles in the transport medium does not exceed 0.1% of the volume per unit volume, particle size <0.2mm.

Note: If the use of media with a small particle, please specify when ordering, in order to use wear-resistant mechanical seal.

德国汉克(HANK)成立于1852年创建于门兴格拉德巴赫(Monchengladbach)是位于德国北莱茵-威斯特州杜塞尔多夫市以西的一座城市。于19世纪50年代初德国经济快速发展,由于德国能源短缺,政府在节能方面加大力度,因此HANK(Trouble Less pump的水泵)公司成立。汉克水泵是以生产高品质、的水泵、测量及控制系统而的跨国性生产企业,在几十个国家拥有子公司及分支机构,公司产品涉及用途:石油、化工、电力、冶金、制药、食品、水处理、市政给排水、天然气、造纸、电子工业、楼宇、机械设备配套等领域。

GERMANY HANK PUMP LIMITED is founded on 1852 in Monchengladbach,which is located at one city in North Rhine in Germany, which is the west of Nordrhein-Westfalen. At the beginning of 1850s, as the rapid development of economic and the shortages of energy in Germany , the government had been in saving energy aspect. On this occasion, HANK Pump (Trouble Less Pump) was established.Hank pump is the world-famous transnational production enterprise,which produces high quality and advanced pump, measurement and control system, and which has its divisions and branches in dozens of countries in the global. The company products user involves the petroleum, the chemical industry, the electric power, the metallurgy, the drugs manufacture, food, the water treatment, the municipal administration to give draining water, the natural gas, the papermaking, the electronics industry, the building, the mechanical device necessary ect..

德国汉克(HANK)水泵的价值理念概括为:责任-远见-创新。我们因自身的责任感、远见及专注于创造的解决方案和理念,而成为的水泵制造商。
The conclusion of the pump concept in German Hank pump is resposibility,foresight,innovation. For ourselves resposibility, foresight and focusing on creating unprecendented solution and concept,our company has become the lead of pump manufacturer in the global.

    
上一篇:爱泽工业部分到货产品专题及库存—BUHLER篇 下一篇:自吸式离心油泵机械密封安装
热线电话 在线询价
提示

请选择您要拨打的电话: