WQD潜水排污泵

该系列水泵是电机和水泵以下泵形式结构而成的电力排灌设备，适用工程建筑工地、煤矿、冶金、印染、纺织等场合排灌污水之用。

WQD Submersible Sewage Pump

This series pump is the pump motor and pump form the following structure from the power irrigation equipment for engineering construction sites, coal mines, metallurgy, printing and dyeing, textile and so on irrigation water use.

　　　 水泵输送介质为常温浆液（小于40℃），PH值在4-10之间，输送价质的固形物的容积比在2％以下。该系列中无堵塞排污泥浆泵，排污能力特强。特殊设计的单流道叶轮排污能力强，不会因固体颗粒、纤维性杂物的吸入而堵塞，也不会因磨粒性价质的吸入而过早损坏。潜水电泵使用扬程不能过低，低于规定扬程80％容易引起热保护器工作，使电泵停止运行，更甚者造成电机损坏。

WQD Submersible Sewage Pump conditions of use:
Transport medium for the slurry pump at room temperature （less than 40 ℃）, PH value is 4-10, delivery price than the quality of the volume of solids below 2%. The series non-clogging sewage pump, sewage capacity exceptionally strong. Specially designed single-flow channel impeller sewage capacity, not because of solid particles, the inhalation of fibrous debris and blockage, will not result in price-quality abrasive inhalation and premature failure. Submersible pump with head too low, below the head 80% of work likely to cause thermal protection, so that pump to stop running and some may even cause motor damage.