超微粉碎机详细资料：

150-300目的粉碎细度、粉碎速度快、使用范围广、操作简单、全机仅重14公斤可随地使用。
1、小空间高速撞击原理加上精密连续风选机构，可以使得粉碎颗粒度平均150目以上，zui高可达300目以上，是小型粉碎机中少有的可以产生有效产量且细度达到微粉级别的优品机器。
2、粉碎速度快，在保证细度的前提下，如珍珠每小时可粉碎3Kg。易粉碎药材每小时可达到5Kg，具有粘性的物质则约为2Kg／h。
3、直刀、小弯刀、大弯刀多种刀型配制，可以有效减少物料本身之性质差异造成的不利粉碎之因素，故而使用范围广，矿物质、纤维质及稍具粘性的物质，均能粉碎*细的粒度。
4、操作简单，无需过筛，粉碎后剩余物料极少，清理方便。
5、人性化设计，并有过载及误开关保护装置，操作无忧。
6、可连续使用，具强力风冷装置，因此无使用时间之限制。
使用轻便，全机仅重14公斤可随地使用。
应用范围：
使用范围广泛，矿物质、纤维质及稍具粘性的物质，均能粉碎*细的粒度，可将物料粉碎成150—500目的超微细粉。适用于专门珍珠粉碎连锁店或美容机构，连续工作，所得珍珠粉200目以上.
个性特点说明：
1、实验用超微粉碎机为*一台桌上型高细度粉碎机，全机仅重14kg，多数物料粉碎细度超过300目；
2、*一台超高速电机（28000转／分钟）能连续运转的粉碎机；
3、粉碎速度为1－5kg/h；
4、直刀、小弯刀、大弯刀多种刀型配制，可以有效减少物料本身之性质差异造成的不利粉碎之因素，故而使用范围广。

该型号参数：
体 积： 260×240×460mm
净 重： 10kg
电 压： 220V
功 率： 1200w
转 速： 23000r/min
粉 碎 量： 1-3kg/h
细 度： 纤维性物质120-350目（1-3KG） 脆性物质12-1500目（2-5KG）

Ultrafine pulverizer details:

The purpose of 150-300 grinding fineness, grinding speed, wide range of use, simple operation, the machine weighs only 14 kg can use everywhere.

In 1, small space hypervelocity impact principle and precision for winnowing mechanism, can make the grinding particle size on average more than 150 mesh, highest can amount to more than 300 mesh, is a small mill in the rare can produce effective yield and fineness of powder level up machine.

2, grinding speed, to ensure the fineness of the premise, such as pearl per hour can be crushed 3Kg. Easily crushed herbs per hour can reach 5Kg, with a sticky substance is about 2Kg / h.

In 3, straight knife, small knife machete machete, a variety of formulation, can effectively reduce the material itself, the different nature of the adverse factors of the crushed, so the use of a wide range of minerals, fiber, and a bit of a sticky substance, can smash the very fine particle size.

4, simple operation, no need sieving, crushing the residual material is few, is convenient to clean.

5, humanized design, and has overload and error switch protection device, operation.

6, continuous use, powerful cooling device, so no time limit.

The use of light, the whole machine weighs only 14 kg can use everywhere.

Range of application:

The use of a wide range of minerals, fiber, and a bit of a sticky substance, can smash the very fine particle size, materials can be crushed into 150 - 500 purpose of ultra fine powder. Apply specifically pearl crushing chain or cosmetology organization, continuous work, the pearl powder more than 200 mesh.

Character description:

1, experiments using superfine disintegrator for only one desktop high fineness pulverizer, the whole machine weighs only 14kg, most of the material fineness of more than 300;

In 2, only one super high speed motor （ 28000 R / min） to the continuous operation of the mill;

3, crushing rate of 15kg/h;

In 4, straight knife, small knife machete machete, a variety of formulation, can effectively reduce the material itself, the different nature of the adverse factors of the crushed, so the use of a wide range of.

The model parameters of:

Volume: 260× 240 × 460mm

Net weight: 10kg

Voltage: 220V

Power: 1200W

Speed: 23000r/min

The crushing weight: 1-3kg/h

Fineness: fibrous substance 120-350 （ 1-3KG ） 12-1500 （ 2-5KG ） of brittle material