广东宏展科技有限公司

制药网免费15

收藏

德国-高低温冲击试验箱

时间:2011-01-10      阅读:974

Vötsch – Thermal Shock Test Cabinet--Model VT 7012 S2
德国-高低温冲击试验箱--型号VT 7012 S2
 
Performance data性能参数
Temperature range of
hot chamber热箱温度范围                 from +50 °C to +220 °C
 
Temperature range of
cold chamber冷箱温度范围               from -80 °C to +70 °C
 
Hot or cold chamber may also be utilized as individual temperature chamber.
热箱或冷箱分别可作为单独温度试验箱使用
 
Temperature deviation in time
in centre of working space
工作室中心点随时间温度偏差              ±0.3 K to ±1.0 K
Temperature deviation in space
空间温度偏差                                    ±0.5 K to ±2.0 K
 
Calibration values校准点                   -40 °C cold chamber and +125 °C hot chamber
                                                      冷箱-40 °C和热箱+125 °C
 
Heating rate of hot chamber
according to IEC 60068-3-5
按照IEC 60068-3-5热箱升温速率 13 K/min.
 
Cooling rate of cold chamber
according to IEC 60068-3-5
按照IEC 60068-3-5冷箱降温速率 5,3 K/min.
 
Heating rate of cold chamber
according to IEC 60068-3-5
按照IEC 60068-3-5热箱降温速率 2 K/min.
 
Temperature changing tests: MIL 883 E, Method 1010.7, Severity D with 12 kg of IC''''s
distributed over 3 shelves; measurement on test speci-mens
温度变化试验:按MIL 883 E, Method 1010.7, Class D
12 kgICs , 分散于3个样品架,在试验样品上测量   
Adaption time < 15 min.恢复时间小于15分钟
The following standards are met
满足的试验标准     DIN 40 046, page 14, test Na,
transfer time < 10 sec.;
IEC-60068-2-14, test Na,
transfer time < 10 sec.;
MIL-STD-810 E, method 503;
MIL-STD-883 E, method 1010.7
variants A,B,C,D,F
JEDEC standard JESD22-A101-A
 
Test space dimensions
试验空间尺寸                                  470 mm wide 
                                                      650 mm deep
                                                      410 mm high 
 
Standard features ...主机标准配置
·         Powder coated housing made of galvanised steel sheet
·         粉末喷涂镀锌钢板外壳
·         Window, 355 mm x 355 mm, in the hot chamber
·         热箱配置观察窗355 x 355 mm
·         1 Ultra-lightweight shelf incl. rails1个轻质样品架,包括导轨
·         Cradle in loading position locked吊篮在装载样品位置被锁定
·         Max. loading capacity of cradle 50 kg吊篮zui大负载能力50 kg
·         80 mm leadthrough直径80 mm引线孔
·         volume compensation system for long-term operation
·         长期操作使用大容量补气系统
·         water-cooled refrigeration unit水冷却制冷系统
·         CFC-free refrigeration cycle全封闭无氟制冷循环
·         Comfortable Color-Touchpanel彩色触摸式控制器
·         Highly efficient 32 bit control and monitoring system
SIMCON/32 NET /32位控制和监测系统SIMCON/32 NET
·         Digital-I/O, potential-free 24 V, 4 freely disposable inputs/outputs
·         数字式I/O,零电势24V,4个可自由选用的输入/输出
·         Independent adjustable temperatur limiter tmin/tmax in cradle
·         吊篮中的独立的、可调节的温度限制器,zui低温度/zui高温度
·         Potential free contact for switching-off of test specimens
·         用于试验样品开关的无电势接触器
·         adjustable software temperature limiter min/max
·         可调节的软件温度限制器,zui低温度/zui高温度
·         Serial interface 接口RS 232
·         Trend display试验状态显示
·         Cycle couter, total no. of cycles / remaining run time
·         循环计数器,总试验循环计数器/剩余运行时间
·         Operating hour counter工作小时计数器
·         European socket欧洲型插座
·         Temperature control using movable sensor in cradle or
alternatively fixed sensor in hot or cold zone
·         温度控制用吊篮中移动传感器或更换冷温箱或热箱中的固定传感器
·         Defrosting cycles automatic and programable自动除霜和程序除霜
·         Dwell time start programable可编程计算停留时间
·         Already programed and may be called up at any time:
MIL 883 E, method 1010.7 Intensity of test A,B,C,D,F
·         随时可以调用已经固化的试验程序,美军标准MIL 883 E, method 1010.7 intensity of test A B,C,D,F
·         Calibration of 2 temperature values2点温度值校正
·         1 Operating instruction操作手册一套
 

上一篇: 德国-小型-高低温试验箱,高低温试验箱 下一篇: 德国新一代气候试验箱,高低温潮湿试验箱
提示

请选择您要拨打的电话: