AH-FU 直燃加热机组

AH-FU 直燃加热机组

参考价: 面议

具体成交价以合同协议为准
2024-05-14 14:20:03
193
产品属性
关闭
上海梭柯环境科技有限公司

上海梭柯环境科技有限公司

免费会员
收藏

组合推荐相似产品

产品简介

直燃加热机组AH-FUDirectgas-firedairmakeupunit型号:AH-FU(直燃加热机组)加热量:1,300KW功能:适用于大空间采暖特点:1.效率高:平均热效率高达95%(比蒸汽锅炉效率高25%)

详细介绍

直燃加热机组

AH-FU Direct gas-fired air makeup unit

型号:AH-FU(直燃加热机组)

加热量 :1,300KW

功能:适用于大空间采暖

特点:

1.效率高:平均热效率高达95%(比蒸汽锅炉效率高25%);

2.维护简单 :无需值守,休息时可关机,运行费用低,减少非生产能耗;

3.加热量大: 回暖速度快,温升高,与传统锅炉房相比,初期投资小,使用更简便;

4燃烧器采用直接燃烧型,燃烧量可在总加热量0~99%范围内调节;燃烧器总管铸铁制成,配上V型带孔的不锈钢制混风板。燃烧器应并联以满足加热量的要求。燃烧器在系统运行时的任何时刻其上的火焰必须覆盖整个燃烧器的长度。其燃烧产生的CO含量低;

5.箱体材料: 箱体面板材料为25mm(【选项】: 50mm)厚的保温板,中间填充玻璃纤维保温棉,A级不燃(【选项】: 聚氨酯发泡)。箱体缝隙,包角和接头应使用密封材料进行密封。保温层制作完毕后应保证保温材料没有暴露在气流中。机组面板与机组框架间采用5mm密封垫密封,密封性能良好;

Model: AH-FU Direct gas-fired air makeup unit

Heating amount:1,300KW

Function:Suitable for large space heating

Characteristics:

1.The efficiency is high: the average heat efficiency is up to 95% (25% higher than the steam boiler efficiency);

2. Easy maintenance: it can be shut down when there is no need to use it, low operating costs, reduce non production energy consumption;

3. Large heating amount: fast heating speed, high temperature rise, it has a less cost in the initial investment compared with the traditional boiler room and the usage is more convenient;

4. The burner is direct combustion type, the combustion volume can be adjusted from 0~99% of total heating. The burner is made of cast iron, equipped with V type stainless steel air mixing plate with holes. The burners should be connected in parallel to meet the requirements of heat amount. Whenever the burner is running, the flame on the burner must cover the length of the whole burner. The maximum CO content produced by the combustion is low;

5. Cabinet material: box panel material is 25mm (option: 50mm) thick insulation board, filled with A-class glass fiber insulation cotton (option: polyurethane foam). Gap between panels, parts for covering corners and the joint should be sealed with the sealing material. The thermal insulation material in the insulation layer must be out of the flow. The 5mm seal gasket is adopted between the unit panel and the frame of the unit, providing good sealing performance and making sure no air leakage.


上一篇:通篇可了解高速旋转式压片机的结构组成 下一篇:高低温冲击试验箱实验完后怎样维护保养
热线电话 在线询价
提示

请选择您要拨打的电话:

温馨提示

该企业已关闭在线交流功能