测厚仪35RDC

测厚仪35RDC

参考价: 面议

具体成交价以合同协议为准
2024-07-27 10:46:10
120
产品属性
关闭
重庆开衡科技有限公司

重庆开衡科技有限公司

免费会员
收藏

组合推荐相似产品

产品简介

35RDCCompositeDamageCheckerThehandheld35RDCisasimpleGo/No-Goultrasonicinstrumentdesignedtodetectsubsurfacedefectscausedbyimpactdamageonsolidlaminateaircraftcompositestructures

详细介绍

35RDC Composite Damage Checker

The handheld 35RDC is a simple Go/No-Go ultrasonic instrument designed to detect subsurface defects caused by impact damage on solid laminate aircraft composite structures. The 35RDC features a backlit LCD that displays the word GOOD if no subsurface damage is found or the word BAD when it detects subsurface damage. It uses an ultrasonic transducer that can be placed or scanned on the area of composite material suspected of having impact damage. Weighing only 0.24 Kg (8.5 oz.) and featuring a simplified keypad, this rugged ultrasonic instrument is easy to operate and requires minimal training.

Features

  • For use on solid laminate structure aerospace composites

  • Simple one-button calibration

  • Thickness range 0.63 mm to 22.8 mm (0.025 in. to 0.900 in.)

  • Simple Good/Bad/Beyond Cal display readout

  • Back light matrix display with user help text

  • AA battery operation

  • Handheld, weighing only 0.24 Kg (8.5 oz.)

  • Energy saving Auto Power off feature

  • Long battery life, 150 hours typical

  • Battery life indicator

GeneralEnvironmental IP65 compliantSplash-proof, impact-resistant case. Sealed, color-coded keypad

Operating Temperature Range-10° C to +50° C (+14° F to 122° F)

Size: (W x L x H)84 mm x 152 mm x 84 mm (3.31 in. x 6.0 in. x 1.50 in.)

Weight0.24 kg (8.5 oz)

Standard InclusionsWrist strap, 3 AA batteries, 5 MHz transducer, transducer cable, couplant, carrying case, rubber protective boot with neck strap, instruction manual, two-year limited warranty

Display Modes
  • Digital Readout Good, Bad or Beyond CAL thickness

  • Advanced user setting shows A-scan or waveform. For use by qualified NDT personnel only.


Thickness Measurement Range**0.63 mm to 22.8 mm (0.025 in. to 0.900 in.)
** Thickness range depends on material, transducer, and surface conditions.

Material VelocityFixed velocity for carbon fiber aerospace composite

Transducer Frequency5.0 MHz

Measurement Update Rate20 Hz

Deviation alarm set pointsProgrammable +/- from calibration point. Set in advance setup
Power SupplyBattery3 AA alkaline or NiMH batteries

Operating Time150 hours typical battery life; 30 hours continuous with backlight on

Low Battery IndicatorContinuously indicates battery status

Battery SaverAuto Power Off/Continuous On

AC Power SupplyOptional

Optional Accessories

USB/ADP-115: AC-115 power supply
USB/ADP-230: AC-230 power supply

*All specifications are subject to change without notice.


上一篇:膜厚测试仪:简介与检测方法 下一篇:检测各种包装容器壁、底厚度的仪器介绍
热线电话 在线询价
提示

请选择您要拨打的电话: