品牌
其他厂商性质
重庆市所在地
Main features:
主要特点
Ø Open type vertical heating furnace,tube and flange can pivot and move away from chamber.
开启式立式加热体,炉管法兰可绕轴旋转移出炉腔。
Ø With standard configuration of OD60mm quartz tube and 20T electrical press
标配Φ60mm石英管真空密封,20T电动压力机。
Ø Adopt graphite push rod and mould,at the same time of pressing,heat the powder to common sintering temperature or lower,to get the dender and uniform product after a short time
采用石墨顶杆和石墨模具,在加压的同时使粉末加热到正常烧结温度或更低一些,经过较短时间烧结成致密而均匀的制品。
Technical Parameters
技术参数
Power 输入电源 | · Power rated: 2KW · 额定功率:2KW |
Voltage 电压 | · Voltage rated: AC220V 50/60HZ · 额定电压: AC220V 50/60HZ |
Working Temperature 工作温度 | · Max. Temperature: 1200 °C ( 1 hr) Z高温度:1200℃ (1小时) · Continuous working temperature: ≤1150℃ 持续工作温度:≤1150℃ · Max. heating Rate: ≤10°C /min Z快升温速率:≤10℃/分 |
控温方式 | · PID automatic control and auto-tune function. 模糊PID控制和自整定调节 · 30 programmable segments for precise thermal processing. 智能化30段可编程控制 · Built-in protection for the over-heated and broken thermocouple. 超温和断偶报警功能 |
Heating Elements 加热元件 | · Resistance wire, Fe-Cr-Al Alloy doped by Mo · 电阻丝(掺钼铁铬铝合金) |
Temperature Accuracy 控温精度 | +/- 1 °C |
Prosessing tube 炉管 | · Φ60*350mm
|
Graphite rod diameter 石墨压杆直径 | 48mm |
Pressure maintain time 保压时间 | 0-50min |
Movable distance 压力行程 | 50mm |
Plunger diameter 活塞直径 | 87 mm |
Pressure stability 压力稳定性 | ≤1MPa/5min |
Weight 重量 | 300kg |
真空法兰 | · Special designed flanges 定制法兰
|
Vacuum Pressure 真空压力 | · 133torr can be achieved by mechanical pump 机械泵可达133torr(1pa) · 10^-6 torr can be reached by molecular pump 分子泵可达10^-6torr(10^-3pa) · Please click the picture below to order vacuum parts 点击下列图片订购真空部件
|
Warranty 质保 | One year limited warranty with lifetime support (Such consumable parts as tO-rings, etc. are NOT supported by the warranty) 一年质保终身支持(消耗品如O型圈等不在质保范围内) |
Warning 注意事项 | · Graphite must used under anaerobic condition 石墨必须绝氧使用 · Considering contact area calculate pressure 计算压强时应考虑接触面积 · Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. 在使用过程中炉膛表面可能出现细小裂纹。这是正常情况,裂纹可以用氧化铝涂层修复。
|
Compliance 认证 | · CE Certified CE认证 · The furnace is ready to pass TUV (UL61010) or CSA certification at extra cost. 可付费进行TUV(UL61010)或CSA认证 |
Operation instructions 操作指导 | · Click to download the operating manual · 点击下载说明书
|