品牌
其他厂商性质
上海市所在地
上海欣谕1平方普通型中试冻干机S10冷冻干燥机生物制药工艺研发中药保健药材真空冷冻干燥机
面议2020欣谕0.5平方压盖中试冷冻干燥机实验室科研冻干机生物制药研发工艺真空冷冻干燥机
面议2021欣谕XY-FD-S5普通型中试冷冻干燥机诊断试剂冻干机疫苗研发摸索冻干工艺真空冷冻干燥机
面议2021压盖西林瓶冻干机中试实验室冷冻干燥机0.3平方生物诊断试剂冻干设备欣谕品牌真空冷冻干燥机
面议2021欣谕中试冷冻干燥机0.3平方实验室试剂冻干机疫苗研发用真空冷冻干燥机
面议2021中试型冷冻干燥机实验室冻干机XY-FD-S2PLC控温生物科研高分子材料真空冷冻干燥机
面议2021欣谕中试冷冻干燥机XY-FD-S2压盖西林瓶冻干设备疫苗等研发工艺生物制药真空冷冻干燥机
面议欣谕小型冷冻干燥机、XY-FD-L4、欣谕冻干机
面议上海欣谕小型冻干机、XY-FD-L4A冷冻干燥机低温小型真空冷冻干燥机
面议中试冻干机蛋白酶生产型冷冻干燥机XY-FD-S2E定制型茶多酚冰冻干燥机
面议欣谕小型实验室冻干机上海XY-FD-1T多肽挂瓶冷冻干燥机
面议上海欣谕XY-FD-S10中型冷冻干燥机、触摸屏PLD冻干机
面议欣谕XY-FD-S2E水冷压盖药机冻干设备 技 术 配 置
附件一
XY-SGY-2.1General Detail总述 | ||||
SrNo. | Description描述 | Specifications规格 | ||
1 | Mode 型号 | XY-SGY-2.1 | ||
2 | Output (approx.) 产量(大约) | 6,600 units of vials 16mm diameter 外径16毫米冻干瓶9,000瓶 | ||
3,200units of vials 22mm diameter 外径22毫米冻干瓶4,500瓶 | ||||
3 | Maximum ice capacity Z大捕冰力 | 50kg | ||
4 | Dimension of unit (approx.) (L × W × H) (mm) 外型尺寸(大约)(长×宽×高)) | 4,500 × 1,800 × 3300(液装置可现场拆装) (Final dimension based on design) (以Z终设计尺寸为准,可根据客户要求调节尺寸) | ||
5 | Weight (approx.) 重量(大约) | 3,500kg | ||
Chamber 冻干箱 | ||||
1 | Chamber type 冻干箱外型 | Rectangular 长方体 | ||
2 | Sloping 箱体倾斜度 | 1% | ||
3 | Finish 内部抛光度 | Ra≤0.4um (0.4Mircon) | ||
4 | Corner 箱内角 | Coping 圆弧角 | ||
5 | Validation port 验证孔 | Included 有(1个)位置箱体顶部 | ||
6 | Viewing port 视镜 | Illuminated 带远射灯【LED广角】 | ||
Number 数量 | 1 | |||
Location 位置 | Side 侧面 | |||
Dimension 尺寸 | DN150 (mm) | |||
Material 材质 | ||||
Internal 内部 | AISI 316 | |||
Insulation 保温 | Alu polyisocyanurate foam 聚氨酯材料 | |||
External cover 外部 | 304 | |||
Door 箱门 | ||||
1 | Finish 抛光度 | Ra≤0.4um (0.4Mircon) | ||
2 | Viewing port 视镜 | Included 有 | ||
Number 数量 | 1 | |||
3 | Open direction 开门方向 | Right (face to door, hinge on left side) 右开(面对箱门,铰链在右) | ||
4 | Open angle 开门角度 | More than 110o 大于110度 | ||
5 | Gasket 密封圈 | O-shaped silicone rubber single gasket O-型硅橡胶单密封 | ||
6 | Locking arrangement 门锁方式 | Manual handle 手动方式 | ||
7 | Material 材质 | |||
Internal 内部 | AISI316 | |||
Shelves 板层 (带西林瓶防护条) | ||||
1 | Temperature range 温度范围 | -55°C to + 80°C | ||
2 | Temperature sensors (shelves) 板层温度探头 | 2 | ||
Silicone oil inlet 导热油进口 | ||||
Silicone oil outlet 导热油出口 | ||||
3 | Product sensors 产品温度探头 | 3 | ||
4 | Number of shelves 板层数 | 7+ 1(upper radiant shelf) (温度补偿板) | ||
5 | Dimension (L × W × T) (mm) 板层尺寸 | 600 × 500 × 16 | ||
6 | Total usable area (sq. m) 总使用面积 | 2.1 | ||
7 | Spacing (mm) 板间距 | 80mm | ||
8 | Hose of flexible connection 软管连接 | Welding 焊接 | ||
9 | Finish 抛光度 | Ra≤0.4um (0.4Micron) | ||
10 | Level 平整度 | ≤±0.5mm/m | ||
11 | Material 材质 | AISI 316 | ||
Condenser 冷凝器 | ||||
1 | Condenser type 冷凝器外型 | Rectangular 长方形 | ||
2 | Viewing port 视镜 | Illuminated 带远射灯【LED广角】 | ||
Number 数量 | 1 | |||
Location 位置 | Easily observe the whole inside condenser 容易观察到整个箱体内部 | |||
Dimension 尺寸 | DN150 (mm) | |||
3 | Final temperature J限温度 | ≤-75°C可定制-85度 | ||
4 | Cooling time (+20 to -40°C) 制冷速度(空载) | ≤30 minutes (empty) | ||
5 | Sloping 倾斜度 | 1% | ||
6 | Finish 抛光度 | Ra≤0.5um (0.5Mircon) | ||
7 | Corner 箱内角 | Coping 圆弧角 | ||
8 | Coiled pipe welding 盘管焊接 | Orbitally welded 自动焊接 | ||
9 | Isolation valve 中隔阀 | |||
Brand 品牌 | Valbia | |||
Type 外型 | 蝶阀 | |||
Size 尺寸 | DN150(mm) | |||
Actuator 制动 | 电动 | |||
12 | Coiled pipe material 盘管材质 | AISI 316 | ||
13 | Material 材质 | |||
Internal 内部 | AISI 316 | |||
Insulation 保温 | polyisocyanurate foam 聚氨酯材料 | |||
External cover 外部 | 316 | |||
Shelf Heating / Cooling 板层升温/降温 | ||||
1 | Circulation pump 循环泵 | |||
Brand 品牌 | 格莱富(美G) | |||
Model 型号 | UPS-32-80 | |||
Type 形式 | Double-motor canned type one standby 屏蔽式 | |||
Number 数量 | 1 | |||
Motor power 电机功率 | 0.35kW | |||
2 | Plate heat exchanger 板式热交换器 | |||
Brand 品牌 | Alfa Laval | |||
Model 型号 |
AC70-40EQ | |||
Type 方式 | Sealed brazed stainless steel 不锈钢封蜂窝式 | |||
Number数量 | 1 | |||
3 | Heater 电加热 | PID control PID 控制 | ||
4 | Maximum heating power Z大加热功率 | 3.0kW | ||
5 | Thermal fluid 导热介质 | Silicone oil 5 cst 粘度5 cst硅油 | ||
6 | Shelf cooling time (+25°C to -40°C) 板层制冷速度(空载) | ≤60 minutes (empty) | ||
7 | Heating rate 加热速度(大约) | 1°C/min (approx.) | ||
8 | Shelves temperature uniformity 板层温度均匀性(空载平衡后) | ≤±1°C (soak stage) | ||
9 | Compressor 压缩机 | |||
Brand 品牌 | Bitzer 比泽尔 | |||
Model 型号 | S4N-12.2Y | |||
Type 方式 | Two-stage 单机双级活塞式 | |||
Number 数量 | 1台 | |||
Motor power 电机功率 | 9kW (×1) | |||
10 | Refrigerant 制冷剂 | CFC-free R404A | ||
11 | Main refrigerating unit 主要制冷元件 | |||
Thermostatic expansion valve 热力膨胀阀 | Danfoss | |||
Solenoid valve 电磁阀 | Danfoss | |||
Sight glass 视液镜 | Danfoss | |||
Water cooling condenser 水冷凝器 | TEYI | |||
Oil separator 油分离器 | ALCO | |||
Accumulator 汽液分离器 | HONGGUO | |||
Liquid filter core 液体过滤芯 |
ALCO | |||
Liquid filter cartridge 液体过滤筒 | HONGGUO | |||
Gas filter core 气体过滤芯 | ALCO | |||
Gas filter cartridge 气体过滤筒 | HONGUO | |||
Pressure meter 压力表 | Refco | |||
Pressure controller 压力控制器 | Danfoss | |||
Vibration absorber 避震管 | PACKLESS | |||
Vacuum System 真空系统 | ||||
1 | Final vacuum J限真空 | ≤1×10 -2mbar | ||
2 | Evacuation time 抽气速度 | ≤30minutes (1×103 mbar to 1×10-1 mbar) | ||
3 | Leakage rate 泄露率 | ≤3×10-2 mbar•lit/sec | ||
4 | Oil pump 油泵 | |||
Brand 品牌 | BOASI | |||
Model 型号 | BSV60 | |||
Type 方式 | DRY-rotary 真空泵 | |||
Number 数量 | 1 | |||
Flow rate 排气速度 | 60m3/hr (×1) | |||
Motor power 电机功率 | 2.2Kw (×1) | |||
5 | Pump isolation valve 泵阀隔离阀 | |||
Brand 品牌 | Valbia | |||
Type 方式 | Butterfly 球阀 | |||
Number 数量 | 1 | |||
Size 尺寸 | DN 40 (mm) | |||
Actuator 制动 | 电动 | |||
6 | Anti-suction valve 真空防倒吸阀 | Included 有 | ||
De-icing 化霜 | ||||
5 | cleaning water outlet valves 化霜水出口阀 | |||
Brand 品牌 | Valbia | |||
Type 方式 | Ball 球型 | |||
Control System 控制系统 | ||||
1 | Software 软件 | XY– 5000 | ||
Automatic 自动 | Included 有 | |||
Manual 手动 | Included 有 | |||
2 | PLC+PC 可编程控制器 | Omron | ||
3 | Computer 电脑 | Lenovo | ||
5 | Vacuum gauge 真空探头 | Edwards | ||
6 | Temperature probe 温度探头 | Pt100 | ||
8 | Breaker 空开 | schneider | ||
9 | Contactor 接触器 | schneider | ||
10 | Relay 继电器 | schneider | ||
Safety System 安全系统 | ||||
1 | Vacuum failure protection 真空失败保护 | Included 有 | ||
2 | Temperature failure protection 温度失败保护 | Included 有 | ||
3 | Compressor protection 压缩机保护 | Included 有 | ||
4 | Other motors protection 其它电机保护 | Included 有 | ||
6 | Interlock protection 连锁保护 | Included 有 | ||
Utility Requirement (approx.) 共用工程消耗(大约) | ||||
1 | Electricity - total electrical load 总装机功率 | 22kW (380V, 50Hz, 3Phase, 5Wire) | ||
2 | Cooling water for refrigerant cooling 用于制冷系统的冷却水 | 8m3/hr (1.5≤P≤2bar, T≤25°C) |
以上为客户案列款2平方药机冻干设备,如有其他增项选配功能可以联系欣谕厂家电话
欣谕CIP/SIP医药冻干机 | ~宋先生 | |||||||||||||
型号 | XY-GY-0.5E | XY-GY-1E | XY-GY-2E | XY-GY-3E | XY-GY-5E | XY-GY-8E | XY-GY-10E | XY-GY-15E | XY-GY-20E | XY-GY-25E | XY-GY-30E | XY-GY-35E | XY-GY-40E | |
隔板面积 | M2 | 0.5 | 1 | 2 | 3 | 5 | 8 | 10 | 15 | 20 | 25 | 30 | 35 | 40 |
装瓶数 | 个/Φ16MM | 1900 | 3900 | 10000 | 15000 | 21000 | 36000 | 46400 | 60000 | 83000 | 100000 | 120000 | 153600 | 168000 |
个/Φ22MM | 1000 | 2000 | 5000 | 7500 | 10500 | 18000 | 23700 | 30500 | 42000 | 49500 | 60000 | 70500 | 82000 | |
散装溶液量 | L | 10 | 20 | 40 | 65 | 100 | 160 | 220 | 300 | 400 | 500 | 600 | 600 | 850 |
隔板尺寸 | 宽(MM) | 300 | 450 | 600 | 600 | 900 | 900 | 915 | 1200 | 1200 | 1495 | 1495 | 1515 | 1495 |
深(MM) | 450 | 600 | 900 | 900 | 1200 | 1200 | 1215 | 1200 | 1495 | 1500 | 1800 | 1830 | 2000 | |
隔板数量 | 个 | 4+1 | 4+1 | 4+1 | 6+1 | 5+1 | 8+1 | 9+1 | 10+1 | 11+1 | 11+1 | 11+1 | 13+1 | 14+1 |
隔板间距 | MM | 100 | ||||||||||||
隔板温度范围 | ℃ | -55~+80℃ | ||||||||||||
冷凝器温度 | ℃ | -75 | ||||||||||||
冷凝器Z大捕水量 | KG | 10 | 20 | 40 | 65 | 100 | 160 | 220 | 300 | 400 | 500 | 600 | 750 | 850 |
PLC | OMRON | |||||||||||||
J限真空 | Pa | 1 | ||||||||||||
系统泄露率 | PA.m³/S | 0.025 | ||||||||||||
装机功率(KW) | 9 | 15 | 28 | 30 | 36 | 46 | 72 | 72 | 101 | 120 | 139 | 212 | 205 | |
长 | mm | 1650 | 2100 | 4500 | 4500 | 5300 | 5500 | 5800 | 5600 | 7500 | 7700 | 8000 | 6600 | 9000 |
宽 | mm | 1200 | 1200 | 1800 | 1800 | 2000 | 2050 | 2500 | 2200 | 2350 | 2720 | 2720 | 2700 | 3000 |
高 | mm | 1900 | 2500 | 3300 | 3300 | 3050 | 3200 | 3400 | 3700 | 4200 | 4300 | 4300 | 4800 | 4600 |
设备重量 | KG | 900 | 1200 | 3500 | 5500 | 6000 | 8000 | 9000 | 11500 | 16000 | 195000 | 22000 | 34000 | 26000 |
*以上数据仅供参考,可根据用户要求定制,Z终数据以合同为准。
1.可选CIP和SIP功能;
2.通常的标配为手动和自动双系统;
3.可根据用户厂房设计冻干机;
4.可根据用户要求选择技术配置;
5.可根据用户要求选择螺杆式压缩机;活塞式压缩机品牌:德G比泽尔;螺杆式压缩机品牌:日本前川、意大利来福康
6.可根据用户要求选择真空泵组形式;真空泵品牌:德G莱宝、英G爱德华、日本爱发科