主要特性与技术指标

4 插槽主机最多可安装 4 个模块，总功率高达 600 W。有 30 多款直流电源模块可供选择（需单独订购模块）

电压表精度：高达 0.025% + 50 µV，高达 18 位

安培计精度：高达 0.025% + 8 nA，高达 18 位

任意波形发生器功能：带宽高达 100 kHz，输出功率高达 500 W

示波器功能：可对电压和电流进行数字化处理，200 kHz，512 kpts，高达 18 位

数据记录仪功能：测量间隔从 20 µs 到 60 s，每个数据记录最多存储 5 亿个读数

4 GB 非易失性数据存储器，用于存储数据记录、示波器迹线、仪器设置

描述

N6705C 为您节省时间

N6705C 直流电源分析仪将多达 4 个电源与数字万用表、示波器、任意波形发生器和数据记录仪功能融为一体，可以显著提高为被测器件提供和测量直流电压和电流的效率。N6705C 可独立测量被测器件的输入电流，无需使用多个设备构建包括传感器（例如电流探头和分路器）在内的复杂测量装置。它也无需开发和调试程序，即可控制仪器组合并进行有效的测量，因为前面板已经提供了所有功能和测量。它还可与 14585A 控制和分析软件一起使用，获得更强大的控制和分析功能。若需要自动进行工作台设置，N6705C 可通过 GPIB、USB、LAN 进行编程，并且符合 LXI 类标准。

Main features and technical indicators

Up to 4 modules can be installed in the 4-slot host, with total power up to 600w. More than 30 types of dc power supply modules are available for selection (modules need to be ordered separately)

Voltmeter accuracy: up to 0.025% + 50 V, up to 18 bits

Ammeter accuracy: up to 0.025% + 8 nA, up to 18 bits

Function of arbitrary waveform generator: bandwidth up to 100 kHz, output power up to 500 W

Oscilloscope function: digital processing of voltage and current, 200 kHz, 512 KPTS, up to 18 bits

Data recorder function: measuring interval from 20 s to 60 s, each data record up to 500 million readings

4 GB non-volatile data storage for storing data records, oscilloscope traces, and instrument Settings

describe

The N6705C saves you time

The N6705C dc power analyzer integrates up to 4 advanced power sources with digital multimeters, oscilloscopes, arbitrary waveform generators and data loggers to significantly improve the efficiency of providing and measuring dc voltage and current for devices under test. The N6705C can independently measure the input current of the device under test, without the need to build complex measuring devices including sensors (such as current probes and shunt) using multiple devices. It also allows you to control the instrument assembly and make effective measurements without having to develop and debug programs, because the front panel already provides all the functions and measurements. It can also be used with 14585A control and analysis software for more powerful control and analysis functions. If the workbench setting is required automatically, the N6705C can be fully programmed