BZJ撒粉包衣机：1、粉末物料包衣造粒。
2、球形颗粒（丸剂）制造。
3、丸剂包衣（薄膜、肠溶性、保护层）
4、缓释包衣、造粒。
一、BZJ撒粉包衣机应用概述
★粉末物料包衣造粒。
★球形颗粒(丸剂)制造。
★丸剂包衣(薄膜、肠溶性、保护层)
★缓释包衣、造粒。
★Powder material’s coating and granulating.
★Pelletizing.
★Pellet coating (film, enteric release, protective layer).
★Slow releasing coating, granulating.
二、BZJ撒粉包衣机设备特点
★完成粉末的包衣、造粒。
★完成粉、粒、丸的掩味、着色。
★完成粉末的包衣获得真球度*的产品。
★完成粉末的包衣液化作业，不易团聚、粘附。
★完成粉末的包衣工艺重复性高。
★完成粉末的包衣供液量自动控制，床内温度稳定无飞溅。
★完成粉末的包衣粉末自动喷洒，计量准确。
★完成粉末的包衣由于离心力的压密作用可处理低密度物料。
★完成粉末的包衣制粒(丸)、包衣、干燥一次完成。
★设计、制造符合GMP规范，清洗快速、*、无交叉污染。
★Coating and granulating of powder.
★Taste masking and coloring of powder, granule and pellet.
★Coating of powder and get high round.
★Powder coating, not easy to agglomerate or adhere.
★Powder coating and have high repeatability of process.
★Auto control of liquid amount to be supplied and the temperature in the bed is constant and no splash.
★Auto spraying of coating powder and the measure is accurate.
★The coating of powder, as the compact action of centrifugal force, it can treat low density material.
★The granulating(pellet),coating and drying can be finished in one body.
★The design and manufacture are conformity with GMP requirents. It is quick and full to clean with no cross pollution.
三、设备外形图：
四、技术参数
| 项目 ltem 规格 Specification | 投料量(kg/批) Capacit(kg/batch) | 转子速度(rpm) Speed of rotor | 转子直径(mm) Dia of rotor | 供粉装置电机功率(kw) Power of motor | 风机功率(kw) Power of fan |
| 360 | 0.5-1.5 | 0-650 | 360 | 0.37 | 1.5 |
| 750 | 5-15 | 0-250 | 750 | 1.5 | 3 |
| 1000 | 10-25 | 0-180 | 1000 | 2.2 | 5.5 |
| 1300 | 15-35 | 0-150 | 1300 | 4 | 7.5 |
所有参数仅作参考，视物料情况，本公司拥有变更权利，并不另行通知。
All datas are used for reference only. According to the condition of material, our factory has the right to change but not notice, pardon!
