全自动外热式灌装封尾机 适合所有塑料管及复合管外热式灌装封尾
外热式
一)参数
Model 型号 | CFY-60A-C |
Power 电源 | Supply: 380V / 3 Phase / AC / 50 Hz 电源: 380V / 3相 / 交流 / 50 Hz |
Main Power 主机功率 | 3KW |
Adopt to the tube diameter 管直径 |
塑料管:5-30毫米 |
Filling capacity 灌装容量 | 2-150ml
|
Filling precision 灌装精度 | ≤+/-1%
|
power 加热功率 | 1.2kw
|
Air pressure 空气压力 | 4-6 MPa
|
Dimensions 外形尺寸 | 2000X1000X1900mm |
Hopper cubage 料斗容积 | 40L
|
外形尺寸 | 2000 ×1000 ×2000mm |
二)、 性能
1、PLC全自动控制, 人机界面直观显示及控制,上管、自动对标、灌装、封尾、打批号、退出管等一机自动完成。
2、自动上管,自动把空管送到工位。
Automatically tube feeding.Tubes can load into station automatically
3、自动找标,管子自动对标和定位装置
Automatic mark-finding \tube-orientation device
4、无管不灌装的精确控制功能。
——由精密光电系统控制,只有工位上有管才启动灌装动作。
No tube no fill
5、注料采用了吹断与切断结合式注料方式保证了高粘度物料的灌装
精密配合的灌装系统及合理的吹断与切断设计保证了灌装精确度。
可快速折卸、快装的结构,使清洗更容易更*。
Technology of blowing-cut and cutting is applied in material filling to ensure the filling of material of high viscosity.
This design can ensure the high filling accuracy with simple structure which is easy to remove and clean.
7、自动批号打印装置
折边封尾及尾部批号打印系统完成。可双面打印批号
Automatic batch code printing device
Tube sealing and batch code printing in end can be finished by system.Batch code can be printed on both sides.
8、自动退出管装置
已灌装、封尾、打批号完成的成品自动从机器上退出,便于和装盒机等设备连接。
Automatic tube-exiting device
Filled ,sealed,printed tubes exit from the machine automatically.It is
convenient to connect with other equipment such as cartooning
machine.
9、实现生产量自动定量控制及产量记数。
Capacity setting control and capacity counting can be realized
10、可进行无级变频调速调节。
Non-step frequency timing
11、大小管径之间更换操作简单明了
It is easy to operate between different sizes of tubes
12、高清可视的不锈钢外框
Highly clear stainless steel frame
13、易于实现乳化机、灌装机之间的连接
It is easy to connect with emulsifier
14、具备故障报警装置
报警信息显示在触摸屏上、报警和警告状态显示
Alarming device
15、机械过载自动停机装置
机械系统过载时安全离合器动作保护并将报警信息显示在触摸屏上
Machine self-stop device when over-loading
Alarming information will display on touch screen
采用冷风在瞬间冷却工位吹在封尾后受热的管尾,避免外壁受热热量传导至膏体。
17、外加热的高温热量不接触物料(药膏),避免物料短期受热变质。
18、我司外加热机型其封尾质量基本等同于内热机型,其他功能如自动上管、对标、灌装、批号打印与其他机型相同,更适合于对热量敏感的药物物料的灌装封尾