产品简介
意大利ASA-RT s.r.l. 旋转机械称重传感器
Load cells for rotating machines
s.r.l.通用压缩牵引称重传感器
s.r.l.滑轮应用称重传感器 扭矩测量
意大利ASA-RT s.r.l. 旋转机械称重传感器
Load cells for rotating machines |
意大利ASA-RT s.r.l.通用压缩牵引称重传感器
s.r.l.滑轮应用称重传感器 扭矩测量
:王工
同号
449147851
价注意事项：
1.请发书面询价函（邮件，，传真等），不接受口头报价。
2.如果型号不能*对上，请提供英文品牌名+具体型号+数量。
3.询价的商友请主动告知公司名称和，谢谢。
Load cells for Pulley application |
| ATB-V : For fibre optic or thin wire production (high speed) |  |  | | Nominal Force | 2,5 ... 50 | N | | Shaft diameter | 8 | mm |
|  Download Pdf
|
| ATB-VE : For fibre optic or thin wire production |  |  | | Nominal Force | 1 ... 100 | N | | Shaft diameter | 8 | mm |
| Download Pdf |
| ATB-S : for wire production |  |  | | Nominal Force | 10 ... 1000 | 250 ... 1000 | N | | Shaft diameter | 10 | 25 | mm |
| Download Pdf |
| ATB-RG : for wire production |  | | | Nominal Force | 10 ... 50 | 125 ... 1000 | N | | Shaft diameter | 10 | 30 | mm |
| Download Pdf |
|
  |
Torque measurement solutions |
| ATB-NXL : Small torque measurement solution |
 |  |
Solution for measuring a small torque of up to 100 Nm applied on a shaft through a pulley and a belt. The belt will act on the pulley applied on the torque-meter, and the torque-meter will trasmit the torque on the central shaft. |
Download Pdf |
Generic compression-traction load cells |
| ATB-CH / TH : Compression load cells |  |  | Stainless-steel compression load cells with high resonance frequency | Nominal Force | 2,5 ... 20 | 0,5 ...100 | 0,5 ...100 | KN | | External diameter | 36,75 | 40 | 40 | mm | Height | 17 with botton | 17 | 20 with botton | mm |
| Download Pdf |
| ATB-2CX : 2 bridges compression-traction load cells |  |  | Compression-traction load cells with 2 independent full bridges, for fail-safe measurement | Nominal Force | 5 .. 100 | KN | | External diameter | 116 | mm | | Internal diameter | M18 | mm | | Height | 40 | mm |
| Download Pdf |
| ATB-CX / TX : Compression-traction load cell |  |  | | Nominal Force | 0,25 ... 50 | 25 ... 250 | KN | | External diameter | 120 | 150 | mm | | Height | 35
40 with botton | 50
60 with botton | mm |
| Download Pdf |
| ATB-CZL : S-shaped compression-traction load cell |  |  | | Nominal Force | 100 - 200 - 300 | 500 - 1000 - 2500 | 5000 - 7500 | Kg | | Diameter | 63,5 | 82 | 102 | mm |
| Download Pdf |
| ATB-GA : bending load cell |  |  | | Nominal Force | 10 ... 200 | Kg | | Dimensions | 120 x 30 | mm |
| Download Pdf |
| ATB-GM : Bending load cell |  |  | | Nominal Force | 500 - 1000 | Kg | | Dimensions | 147 x 35 x 45 | mm |
| Download Pdf |
| ATB-GR : Bending load cell |  | | | Nominal Force | 750 .. 20000 | N | | Dimensions | 130 x 31,5 x 31,5 | mm |
| Download Pdf |
| ATB-Z : Pivot shaped load cells |  |  | Pivot-shaped compression load cells, avilable in steel or stainless-steel. Solutions based on Customer's drawing are also possible | Nominal Force | 1 ... 10 | 25 ... 50 | 100 | 250 | 500 | 1000 | KN | | Diameter | 30 | 40 | 50 | 70 | 80 | 100 | mm | | Length | 75 | 100 | 125 | 175 | 200 | 250 | mm |
| Download Pdf |
|
|
| ATB-HS : |
 |  |
Load cell for pulley insensitive to centrifugal force,
with built.in analog amplifier with output in voltage or current. |
Download Pdf |
| ATB-ARS : |
 |  |
Load cell for pulley insensitive to centrifugal force,
with built.in analog amplifier with output in voltage or current,
or digital amplifier with RS485, Profibus or CANopen fieldbus. | Nominal Force | 70 ... 1000 | N |
|
Download Pdf |
| ATB-RS : |
 |  |
Load cell for pulley insensitive to centrifugal force,
with built.in analog amplifier with output in voltage or current,
or digital amplifier with RS485, Profibus or CANopen fieldbus. | Nominal Force | 125 ... 15000 | N |
|
Download Pdf |
| ATB-AWR : |
 |  |
Push button load cell insensitive to centrifugal force,
with built in analog amplifier with output in voltage or current. | Nominal Force | 50 ... 5000 | N |
|
Download Pdf |
