下载制药通APP了解更多制药 行业资讯

打开APP
商品详情
11

德国进口卧式单级双吸离心泵

参考价
面议

具体成交价以合同协议为准

上海市

营派阀门(上海)有限公司

产品型号:KAYSEN     厂商性质:生产厂家
中国上海市虹口区,四川北路1365号
进入商铺全部商品

产品简介

德国进口卧式单级双吸离心泵 进口双吸离心泵厂家 进口离心泵价格
单级双吸离心泵是单级、双吸水平中开式离心泵,适应于工厂、城市、矿山、电站、农田、水利工程等领域。用输送不含固体颗粒的清水或物理、化学性质类似于水的其它液体。

产品详情

德国进口卧式单级双吸离心泵 进口双吸离心泵厂家 进口离心泵价格Double suction centrifugal pump

德国KAYSEN凯森进口卧式单级双吸离心泵概述

单级双吸离心泵是单级、双吸水平中开式离心泵,适应于工厂、城市、矿山、电站、农田、水利工程等领域。用输送不含固体颗粒的清水或物理、化学性质类似于水的其它液体。

主要特点:

本型泵的吸入口与吐出口均在水泵轴心线的下方,与轴线垂成水平方向.检修时无需拆卸进出口水管及电机.从转动方向看去,水泵为顺时针方向旋转/根据用户需要亦可改为逆时针方向旋转。

泵主要零件有:泵体,泵盖,叶轮,轴,双吸密封环,轴套等。

泵轴由两个单列向心球轴承支承。轴承装在轴承体内,安装在泵体两端,用黄油润滑。

双吸密封环用以减少水泵压力室的水漏回吸水室。

泵通过弹性联轴器由电动机直接传动。必要时亦可用内燃机传动。

轴封为软填料密封,根据用户需要可采用机械密封结构。

泵体与泵盖构成叶轮的工作室,在进出水法兰上,制有安装真空表和压力表的管螺孔。进出水法兰的下部,制有放水的管螺孔。

经过静平衡校验的叶轮,用轴套的两边的轴套螺母固定在轴上,其轴向位置可通过轴套螺母进行调整。

主要优点:

离心泵 安装形式 装配时不需调整,可根据现场使用条件,分立式或卧式安装

结构紧凑 外形美观,稳定性好,便于安装

轴承选用SKF及NSK轴承保证运行平稳,噪音低,使用寿命长

轴封选用机械密封或填料密封,能保证8000小时运行无泄漏

加装自吸装置,可实现自动吸水,即不需安装底阀,不需真空泵,不需倒灌,离心泵可以启动

运行平稳 优化设计的双吸叶轮使轴向力减小到zui低限度,且有优异水力性能的叶型,离心泵泵壳内表面及叶轮表面具有抗汽蚀性能

主要应用:
工厂

矿山

城市给水

电站

农田排灌

各种水利工程

 

Germany KAYSEN imported horizontal single - stage double - suction centrifugal pump overview
Single-stage double-suction centrifugal pump is a single-stage, double-suction level in the open centrifugal pump, adapted to factories, cities, mines, power plants, farmland, water conservancy projects and other fields. With the delivery of solid particles without solid water or other physical and chemical properties similar to water.

main feature:


The pump inlet and outlet are in the pump below the axis line, and the axis down into the horizontal direction. Maintenance without the need to remove the import and export of water pipes and motors. From the direction of rotation, the pump is rotated in the clockwise direction and can also be rotated counterclockwise according to the user's needs.
Pump main parts are: pump, pump cover, impeller, shaft, double suction ring, sleeve and so on.
The pump shaft is supported by two single row radial ball bearings. Bearings installed in the bearing body, installed at both ends of the pump, with butter lubrication.
Double suction seal ring to reduce the pump pressure chamber water leakage back to the suction chamber.
The pump is driven directly by the motor through the elastic coupling. If necessary, can also use internal combustion engine transmission.
Shaft seal for the soft packing seal, according to user needs can be mechanical seal structure.
Pump and pump cover constitute the impeller of the studio, in and out of the water flange, the system has a vacuum gauge and pressure gauge tube screw hole. Out of the lower part of the water flange, made of water pipe screw hole.
The impeller with static balance check is fixed on the shaft with the sleeve nuts on both sides of the sleeve and its axial position can be adjusted by the sleeve nut.

Key Benefits:

● Centrifugal pump installation in the form of assembly without adjustment, according to field conditions, discrete or horizontal installation
● compact structure beautiful appearance, good stability, easy to install
● SKF SKF bearings and NSK bearings to ensure smooth operation, low noise, long service life
● Seal seal mechanical seal or packing seal, can guarantee 8000 hours to run without leakage
● Install the self-priming device, can achieve automatic water absorption, that is, without installing the bottom valve, no vacuum pump, no backflush, centrifugal pump can start
● Smoothly optimized design of the double suction impeller so that the axial force is reduced to a minimum, and excellent hydraulic performance of the leaf type, centrifugal pump pump shell surface and impeller surface with anti-cavitation performance

main application:
● Factory
●Mine
● City water supply
● power station
● farmland irrigation and drainage
● various water conservancy projects

德国进口卧式单级双吸离心泵 进口双吸离心泵厂家 进口离心泵价格

德国KAYSEN凯森对您的承诺:

●放心的质量:从铸件到产品,实行全过程质量监控,*检测,责任到人!

●贴心的价格:高效成本控制,自产自销,减少中间环节,让利于客户!

●快速的货期:充足的库存,上海便捷物流,缩短交货期,严格按照合同期交货!

Germany Kaysen commitment to you:

● Reliable quality: from casting to the product, the implementation of the whole process of quality control, all-round detection, responsibility to the people!

● intimate price: efficient cost control, production for sale, to reduce the intermediate links, to help customers!

● fast delivery: adequate inventory, Shanghai convenient logistics, shorten the delivery time, in strict accordance with the contract delivery!

进口双吸离心泵厂家 进口离心泵价格

在线咨询 热线电话
免费会员