机床主轴 数控车床高速电主轴 德国*,高速高精度
应用 | 钻, 铣, 磨, 雕刻机床主轴 | Applications | Drilling, Milling, Grinding, Engraving |
外壳夹装尺寸 | 60 mm | Clamping diameter | 60 mm |
马达类型 | 3相异步高速电机 | Motor system | 3 Phase asynchronous motor |
转速范围 | 2,500 – 20,000 min-1 | Speed range | 2,500 - 20,000 rpm |
额定电压 | 230 V | Voltage | 230 V |
电流 | zui大 8 A | Current | max. 8 A |
扭矩 | zui大 105 Ncm | Torque | max. 105 Ncm |
频率 | 83 - 667 Hz | Frequency | 83 - 667 Hz |
功率 | zui大 1,500 W | Output power | max. 1,500 W |
重量 | 3.5 kg | Weight | 3.5 kg |
轴承 | 3 x 钢球轴承, 油脂润滑 | Bearing system | 3 x Steel, lifetime lubrication |
防护等级 | IP 54 | Protection category | IP 54 |
电机保护 | PTC - 100 °C | Motor protection | PTC - 100°C |
安装位置 |
| Working position |
|
负载方向 | 轴向 + 径向 | Load direction | axial + radial |
锥面跳动 | 通常 1 µm | Run-out (taper) | typ. 1 µm |
夹持范围 | Ø 1.0 – 6.35 mm (包括 1/8 + 1/4") | Chuck clamping range | Ø 1.0 - 6.35 mm (incl. 1/8 + 1/4") |
换刀方式 | 2 开口扳手 (SW 13 + 10) | Tool change | 2 open-end wrenches (13 + 10 mm) |
冷却系统 | 外夹具冷却 | Cooling system | Cooling via clamping bracket |
防水防尘措施 | 密封气0.5–0.8 bar(管径Ø 内/外 4/6 mm) | Protected against dirt | Sealing air 0.5 - 0.8 bar |
外壳材料 | 不锈钢 | Housing material | Stainless steel |
*变频器 | e@syDrive® 4438, TV 4538 | Inverter recommendation | e@syDrive® 4438, TV 4538 |
| 保留修改权 |
| Subject to change without notice |